What's new
By:

WTB Donor "A" Board for CPS1 Multi

Want To Buy
LittleMegaGamer

LittleMegaGamer

Enthusiast
Joined
Jun 1, 2023
Messages
201
Reaction score
157
Location
Ireland
Updated on the 15/01/2025
Hi,
Looking for a Donor "A" Board for CPS1 Multi like the ones in the following pictures. Text me if you wanna sell one. Tx

best_a_board.jpg

good_a_board.jpg


Pictures are from this thread https://www.arcade-projects.com/threads/what-donor-board-to-use-for-the-cps1-multi.13106/
 
Last edited:
Hi,
I am looking for a working board like the following picture. In good condition and without any jumpers...
If you have one, please, let me know the price including shipping to Ireland.
In the case, I will ask for some pictures and a video of the board tested. Thanks
CPS1_A_board_Dash.jpg
 
Probably better buying a full board set as not many a boards around on their own
 
I can offer a non dash set with a 10mhz crystal, it's a converted 1941. Mitsu just released the new dual crystal mod which should work if you're trying to multi.
 
astro_zombie138 said:
I can offer a non dash set with a 10mhz crystal, it's a converted 1941. Mitsu just released the new dual crystal mod which should work if you're trying to multi.
Click to expand...
Yep, I am looking for one spare for the multi…. I will have a look to the new dual crystal mod… but I stick trying to find one board like in the picture
 
astro_zombie138 said:
I can offer a non dash set with a 10mhz crystal, it's a converted 1941. Mitsu just released the new dual crystal mod which should work if you're trying to multi.
Click to expand...
Hi, I am assuming you have the other model of donor board suitable for the Multi (the short one with the 10Mhz Crystal, right? Please let me know your price including shipping to Ireland in PM, and I will consider it even if it would be easier to find one in Europe... (I am looking just for the A board) tx
 
astro_zombie138 said:
https://www.arcade-projects.com/threads/cps1-1941-counter-attack-conversion.28891/#post-419754

It was confirmed with @Darksoft that it was a suitable donor. There's a link with pictures in that thread. Shipping to Ireland would probably be around $50 I would assume.
Click to expand...
That is the longer board, If I confirmed that it worked it was a mistake, that PCB is not suitable for the multi. Please check here: https://www.arcade-projects.com/threads/what-donor-board-to-use-for-the-cps1-multi.13106/
 
@astro_zombie138

Went back and looked at my private messages and it appears there was a communication error between me and @Darksoft . I don't want to post private messages publicly but it was mentioned that the PCB was multi-ready, but it would need a different C-board particularly for games like Strider. Perhaps what was meant was that the B board was multi-ready? There's no specific mention about the A-board being multi-ready in the message. Again, I don't want to post PMs here.
 
Joko3 said:
@astro_zombie138

Went back and looked at my private messages and it appears there was a communication error between me and @Darksoft . I don't want to post private messages publicly but it was mentioned that the PCB was multi-ready, but it would need a different C-board particularly for games like Strider. Perhaps what was meant was that the B board was multi-ready? There's no specific mention about the A-board being multi-ready in the message. Again, I don't want to post PMs here.
Click to expand...
Miscommunication, no biggie. Yeah, don't post pm's that wouldn't be cool. I'm not knowledgeable on the subject and was mistaken.
 
You must log in or register to reply here.
Back
Top