Johnfan1986
Professional
Lovely
- Thread starter everten
- Start date
beast1x5
Professional
installed mine today. came out great
https://pbs.twimg.com/media/Eoe-g0XW4AkUN3F?format=jpg&name=large
https://pbs.twimg.com/media/Eoe-g0XW4AkUN3F?format=jpg&name=large
Glad to see. Enjoy!
merrygoomba
Student
Nice @merrygoomba
I’m building more right now. I hope I’ll be able to polish off all pending requests this week.
I’m building more right now. I hope I’ll be able to polish off all pending requests this week.
bagheera369
Champion
Got both my F3 and STV pcb's in today. They look great...thanks!
Finally! I've PMed everyone on my list. If you were interested in purchasing a board and have not received a PM from me I apologize. I tried to keep record of past PMs and replies to this thread, but I've certainly missed some of you. Please reach out to me via PM if this is the case and I'll do my best to get a board out to your ASAP.
Thank you everyone!
Edit: There were about 5 people who I never heard back from. After a few days of no response I moved on down the list. I haven't been sending follow ups and assume you aren't interested anymore. Please send me a PM if you still want one.
Thank you everyone!
Edit: There were about 5 people who I never heard back from. After a few days of no response I moved on down the list. I haven't been sending follow ups and assume you aren't interested anymore. Please send me a PM if you still want one.
bagheera369
Champion
Looking forward to seeing your next product!!!
Stay tuned. I have some things in mind.
Kroukistar
Beginner
That's amazing! I would like to order one with a Lions 3 case riser please. Thanks 
Hi, I previously mentioned I was interested in your ST-V board and then I saw this. Now I'm interested in both
Yes, will send you a PM shortly. Thanks!
Small update...
I have a new F3 IO design that adds a switch to control spinner/joystick jumper changes. This will enable people using cases such as the Lions3 multi case to flip between spinner and joystick controls without removing the case. It includes a secondary wire harness to connect to JP3 in place of the jumper.
The switch and extra wire harness will be available as an option for a few extra dollars.
The initial batch is limited and some have already sold. I held orders for the last few weeks to give people the option of getting the new board so I apologize for the delay.
More pics to follow. I'll update the pricing, etc. on the original post when I get some time.
I have a new F3 IO design that adds a switch to control spinner/joystick jumper changes. This will enable people using cases such as the Lions3 multi case to flip between spinner and joystick controls without removing the case. It includes a secondary wire harness to connect to JP3 in place of the jumper.
The switch and extra wire harness will be available as an option for a few extra dollars.
The initial batch is limited and some have already sold. I held orders for the last few weeks to give people the option of getting the new board so I apologize for the delay.
More pics to follow. I'll update the pricing, etc. on the original post when I get some time.
Rev 2 with the spinner switch is so great! Thanks for doing this. It was a pain to have to leave my Lion's case unscrewed to be able to set that jumper.
Also, those gold stereo contacts tho... fantastic!
Also, those gold stereo contacts tho... fantastic!
Limited edition! The gold RCAs were actually ordered by accident. A few boards that go out will have them but most will not.
J
