Garnet, a Taito G-Net multi-game loader with support for other PSX-based systems

I just did a byte to byte check with the img file and they are the same so I assume it must be some kind of non-standard partitioning related to the G-Net.
I'll try it later on actual HW because I don't have it with me right now.
 
1795251770803.png


Hello everybody!

R-TYPE DELTA G-NET is ready to be tested.
Thanx to all the ppl here, especially Kyle22 - already enjoying Gamshara - wow - what a money saver this port is.. pcb costs are very high for this one. Also BB.
 
Last edited:
Version 0.88 released. This provides better music timing for a number of titles; the original report was that music in Heaven's Gate and Rival Schools ended earlier in the attract mode than it should. This is now much closer to accurate; not quite PCB perfect, but much closer.

On that note, I want to make sure I state this very clearly: There will be concessions that need to be made on some ports. The G-Net CF loader is considerably slower than the ram chips on other PCBs. We are also converting music from systems that have dedicated processing chips, to a system where we need to share the CPU.

In games where a decision must be made, I will always prioritize arcade-accurate gameplay over load times, music/sound quality and attract mode accuracy, etc.

Obviously I am going to do my absolute best, but the compact flash loading speed is a bottleneck that we have to work around. The reason the mentioned games' (and others I ended up fixing) music ended earlier than the PCB is not due to an actual music issue; it sounds great. It is because during attract mode some scenes take longer to load, while the music still plays. The reason that attract mode stands out more than anything is simply because it is a long, sustained music track that is easily comparable to the PCB.

Anyway, hope you are all enjoying the multi and the games!
Would it be possible, in the near future, to design an expansion board equipped with an FPGA (or a microcontroller like a Raspberry Pi), extra memory, and a microSD slot ?

The idea would be to bypass this bottleneck to take some load off the G-Net system, making it easier to customize games later on (such as replacing the music with the arranged tracks from console versions, etc.).
 
I've definitely got a lot more games on the way, but there's a certain Konami GV game I would absolutely love to see on this thing. Gonna mess with that once I've released a few more of the games I'm currently in the middle of!

And I'm open to PSX stuff too (I really want Harmful Park on PCB), but I'm very interested in the work @arcademodbios is doing and can't wait to play his ports.

Tokimeki Memorial: Oshiete Your Heart :love: ​

1795261887243.png


Do you think Battle Tryst on Konami M2 could run on G-NET ?


 
Thanks for this great Multi !
+1 for 4GB SanDisk Extreme III 30MB/s, seems to work properly

Unfortunately "Brave Blade" does not appear to load for me (no video after blue patch screen), all others I tried do with additional caveat below.
My G-NET board does not run "RC de Go"/"Go By RC" from a single game flashed CF card (https://www.arcade-projects.com/threads/go-by-rc-rc-de-go-booting.14964/) and I was secretly hoping (I know it's irrational) the GarNET version might work but it behaves just the same, i.e. goes into a reboot loop.
Would be great if it were possible to create a version that runs for all the owners of G-NET boards that don't run "RC de Go", "Soutenryu" and "Shanghai Shoryu Sarin". Buying another board feels a bit like a lottery ^^
 
Would it be possible, in the near future, to design an expansion board equipped with an FPGA (or a microcontroller like a Raspberry Pi), extra memory, and a microSD slot ?

The idea would be to bypass this bottleneck to take some load off the G-Net system, making it easier to customize games later on (such as replacing the music with the arranged tracks from console versions, etc.).
It's already been done quite some time ago, just waiting for @NaokiS28 to print them :)
 
Thanks for this great Multi !
+1 for 4GB SanDisk Extreme III 30MB/s, seems to work properly

Unfortunately "Brave Blade" does not appear to load for me (no video after blue patch screen), all others I tried do with additional caveat below.
My G-NET board does not run "RC de Go"/"Go By RC" from a single game flashed CF card (https://www.arcade-projects.com/threads/go-by-rc-rc-de-go-booting.14964/) and I was secretly hoping (I know it's irrational) the GarNET version might work but it behaves just the same, i.e. goes into a reboot loop.
Would be great if it were possible to create a version that runs for all the owners of G-NET boards that don't run "RC de Go", "Soutenryu" and "Shanghai Shoryu Sarin". Buying another board feels a bit like a lottery ^^
Hi :)

All three of my G-NET motherboards boot RC de Go / Go By RC from a single CompactFlash (CF) card containing the game.

I can get to the RC controller calibration menu, but since I don't have the controllers, I can't go any further.;(
 
It's already been done quite some time ago, just waiting for @NaokiS28 to print them :)

Hi Hammy! :)

Awesome:thumbup:,
I actually thought about that too when remembering ROM1's SEGA DSB CLONE, which managed to handle CD-quality music in WAV and MP3 formats.

That's where I got the idea for an audio module for the G-NET.
 
I did some further testing and from all the Yamaha sound conversion I can only load "Cool Boarders Arcade Jam" all others show no signs of video output after the blue patchloader screen.
I flashed "brvblade_music.img" to a know good working CF card and it behaves the same. I then flashed the image without music and that goes into a reboot loop after initially showing the loading screen.

edit: Strider 2 also does not load for me
 
Last edited:
thanks for the pointers for the kick harness, anything else needs to be hooked up there like ground or something?

sadly amazon sent me the wrong card so I don't this I'll be able to test this right now🥲

I'm eager to try games like fighting layer and soul calibur😁

DDR and Taiko no tatsujin would be crazy awesome too

thanks a lot for your awesome work and deddication🤩
For the kick harness, buttons 1 and 2 go to pins 8 and 9, and then need ground on 15. Added to OP!

I did some further testing and from all the Yamaha sound conversion I can only load "Cool Boarders Arcade Jam" all others show no signs of video output after the blue patchloader screen.
I flashed "brvblade_music.img" to a know good working CF card and it behaves the same. I then flashed the image without music and that goes into a reboot loop after initially showing the loading screen.

edit: Strider 2 also does not load for me
I'm sorry, I haven't seen these issues among multiple CF cards :( if anyone else runs into this same thing, please let me know so we can find some commonalities. I'm guessing you've confirmed your 5V? Once things settle down a bit I can look into creating an alternate version of RC de Go to see if we have any luck.

Great that this has its own thread now, and great to see further progress.


I want to make sure I understand. Does that mean all games on Garnet will stream from CF rather than flashing chips on the motherboard? Or does it still flash some data to chips on the mobo, but CF transfers are generally much slower than the original non-G-Net hardware?
Not all games, no. Most of the new conversions have to though. G-Net originally uses the on-board chips for sound flash, but with converted music (the way I've done it) there is no way for it to fit in the flash. Game data streams the same way G-Net originals do, no real change there. Where I can utilize pre-data loads in an advantageous way though, I want to optimize. It's hard to do a lot with 6 MB though.

Thank you for sharing this!
I just downloaded v0.88 . File is around 3.3GB but when I burn it I only can see a 39MB fat16 partition. Disk tool is reporting the remaining space as free (non allocated). This is expected?
I used Linux' default image writer program so I don't discard a problem with that.
Thanks again!
This is normal, yes. In Windows I see 39MB used and 7.48GB "Unallocated" (on an 8GB card)
 
Last edited:
I'm sorry, I haven't seen these issues among multiple CF cards :( if anyone else runs into this same thing, please let me know so we can find some commonalities. I'm guessing you've confirmed your 5V? Once things settle down a bit I can look into creating an alternate version of RC de Go to see if we have any luck.
I measured and adjusted to 5V (even slightly higher to 5.1V) at the Jamma edge under load.
I'm not sure anyone really knows why some boards don't run RC de Go but I'm now a bit surprised that it would also link to the conversions, G-Darius and Raystorm do load though.
 
I measured and adjusted to 5V (even slightly higher to 5.1V) at the Jamma edge under load.
I'm not sure anyone really knows why some boards don't run RC de Go but I'm now a bit surprised that it would also link to the conversions, G-Darius and Raystorm do load though.
maybe there are slight different versions of chipset out there ? i would not be surprised if this is linked to the SPU shadow reads ZN2 needs or timing issues in general on some bus.
I had several GNETs in the past where Aero Fighter Special did not work...
 
Roadmap for Garnet over the next week or two:

-Resolve any further reported bugs
-Add a G-Net hardware diagnostic tool to the Garnet menu (thanks for the great idea @ekorz ), might help diagnose some G-Net board loading issues
-Look into adding a separate way to reset to Garnet menu (P3 button 3) for users who would prefer it over holding start; look into Garnet menu toggle between the two options
-Look into adding (optional?) folder structure by original arcade system
-New additions that are currently in progress:

Tetris The Grand Master
Xevious 3D/G
Seishun-Quiz Colorful High School

-Prove out (or fail :D) Konami GV by trying to port Susume! Taisen Puzzle-dama
 
Initial system diagnostic functionality is completed and Xevious 3D/G is ready for full testing. They will both be in 0.90, hopefully with another game or two depending on when I release.

For now, after working on this in most of my free time for almost two weeks straight, I'm gonna take a little break for the rest of the day and play some games :)
 
Question : Are changes like :
1) Changing output resoultion prossible ? e.g arcade version of Rival schools runs in 480i , in theory would it be possible to change it to 240p output ?
2) Changing audio of arcade games to use wav files ? e.g arcade version of Tekken 3 using PSX version CD audio ?
 
Question : Are changes like :
1) Changing output resoultion prossible ? e.g arcade version of Rival schools runs in 480i , in theory would it be possible to change it to 240p output ?
2) Changing audio of arcade games to use wav files ? e.g arcade version of Tekken 3 using PSX version CD audio ?
Theoretically any modding is possible with the way these conversions have been done, yes.

High quality audio is the toughest part of all of this though because we don't have a dedicated sound chip, and we have slower load times. Making the audio quality worse is almost positively going to be required in games like Tekken Tag and Street Fighter EX based on initial benchmarks.

Swapping a soundtrack with an arrange/PSX version's music is absolutely possible, though.

480i to 240p is a great idea, too. I'll add it to the short list!
 
Last edited:
I asked an AI about this, and I have doubts about some of its info.

I own the original Japanese copies of the games, but they've been stored away in a closet with tons of boxes in front of it,
so I can't get to them, damn it! StillX/, I'm sure that Battle Arena Toshinden 2 and Heaven's Gate use Red Book Audio,
and I used to listen to them often on my audiophile setup back in the day.



Game (PS1 Release Year)Primary Music FormatSample Rate / EncodingTechnical Details
Battle Arena Toshinden 2 (1996)CD-DA (Red Book) + SPU (SEQ)44.1 kHz / 16-bit (uncompressed)Mixed-mode disc containing 16 standard CD audio tracks playable on any CD player (stage themes). Short jingles (character select, continue) use the SPU hardware sequencer (.PSF/.SEQ in 4-bit ADPCM).
Heaven's Gate (1996)CD-DA (Red Book)44.1 kHz / 16-bit (uncompressed)Mixed-mode disc with 1 data track and 16 standard CD audio tracks for stage and menu music. Voices and sound effects are handled by the SPU.
Dead or Alive (1998CD-DA (Red Book)44.1 kHz / 16-bit (uncompressed)Despite its late release, the PS1 port features 28 rearranged CD audio tracks (including stage music and defeat voice clips) in full uncompressed CD quality, readable on standard CD players.
Street Fighter EX Plus α (1997)CD-ROM XA (Streaming) + SPU37.8 kHz ADPCM (stereo)No CD-DA tracks. The arranged soundtrack is streamed directly from the disc in XA format to allow faster loading times, while voices and SFX run on the SPU.
Street Fighter EX2 Plus (1999)CD-ROM XA (Streaming) + SPU37.8 kHz ADPCM (stereo)Uses the same audio architecture as the first game: streamed 37.8 kHz XA audio preserves the recorded guitars and synths while leaving the 512 KB SPU RAM free for voices and sound effects.
Rival Schools (1998SPU Sequenced (.SEQ/.VB -> .PSF) + XA4-bit ADPCM (44.1 kHz output) + XA 37.8 kHzThe only game on this list whose battle music is sequenced in real time on the SPU (Capcom's custom MIDI-like sequencer + sample banks). XA streaming is reserved for FMVs and the extensive voice acting in Evolution mode (Disc 2).
 
Back
Top