I recently picked up 2 Initial D v1 machines(Master and Slave) and a single v2 machine(Slave). The goal is to get the v2 machine working by itself and then figure out how to run ID v1/2/3 and Crazy Taxi on it and it will go in our personal arcade. The wiring is what is throwing me.
As seen in the picture below, I can boot up the system if I plug a power cord directly to the Power supply under the seat. Can confirm all the buttons, pedals and steering wheel work. This is not how it is supposed to run because all the power seems to run back through to the Master cabinet so when you power on the master, the slave powers up. Currently I have no sound, no monitor, no lights.
Do I need to add a second power supply to run the upper part of the cabinet which in turn feeds power to the second PSU under the seat which powers up the Naomi? I hope that makes sense. Appreciate it
As seen in the picture below, I can boot up the system if I plug a power cord directly to the Power supply under the seat. Can confirm all the buttons, pedals and steering wheel work. This is not how it is supposed to run because all the power seems to run back through to the Master cabinet so when you power on the master, the slave powers up. Currently I have no sound, no monitor, no lights.
Do I need to add a second power supply to run the upper part of the cabinet which in turn feeds power to the second PSU under the seat which powers up the Naomi? I hope that makes sense. Appreciate it