help with wiring on Initial D 8 server box

[Arcade_Replay]

trying to build a server box. I have the correct Ring edge board with key and hard drive which boots up to the server. I have the I/o board as well but I'm trying to figure out the router, network switch situation and wiring.

if anyone can take pictures of their setup that would be amazing. thanks

 

[nem]

How many cabs do you have? If you just have two, connect both cabs and the terminal to the router.

 

[Arcade_Replay]

I have 2 cabs, my server board boots up to this image. do I just need a router / network switch and connect all 3 together?

 

[nem]

Router, yes.

For the record I have the official Sega router, but from what I've understood any router should work.

 

[Arcade_Replay]

Finished wiring up my cabinets last night.

First make sure DHCP is enabled on player 1, 2 and server unit.
Buy the router GL.iNet GL-MT3000 and go into its settings and set the Ip address to 192.168.37.*
the router does not have enough LAN ports so I bought a switch TP-Link TL-SG105
make sure player 1 and 2 are set to A1 and A2
I added a picture on how its suppose to be wired up. basically connect all ringedge boards to the switch and the router to the switch. simple.

I technically built my server box...