What's new

Home Arcade System

RGB said:
Please check this post for the complete list of features and compare it with other superguns - [PRE-ORDER] HAS V3.3
There are additional modules and accessories available for the HAS, too.
Click to expand...
Hi there, what´s the difference between v3.2 and v3.3? just got my hands on my 3.2 unit that I received a while ago and I am curious. Thanks.

UPDATE:

I see
- Selectable video Low Pass Filter (new feature added in the HAS V3.3)
 
Last edited:
@RGB or I guess anyone. I bought a Buccaneers game recently and I have my HAS connect to my OSSC. On the OSSC I get no sync at all. Any idea what could be wrong? Out of 46 PCBs this is the only one that does NOT sync with the OSSC.

It does work on an RGB monitor however.

https://www.arcade-museum.com/game_detail.php?game_id=13394

My other problem is my System 24 PCB, which I don't know for sure works as I don't have a medium resolution monitor to test. It DOES sync with the OSSC, but I don't getting anything on the TV.

The OSSC screen shows:
423p
24.39kHz
57.66Hz

Which doesn’t seem correct as I don’t think the S24 board is 423p.

Anyway, my TV keeps displaying the “resolution is not supported” message and nothing.
Any thoughts to what settings I should use?

All that being said, I know this is the HAS thread, so support for Buccaneers is what I'm here looking for as I've posted about the S24 in the OSSC forum, but hey, maybe someone can kill two birds for me!
 
xtrasmiley said:
Anyway, my TV keeps displaying the “resolution is not supported” message and nothing.
Click to expand...
The OSSC most likely IS outputting a image with the rates above, but the TV is unable to display the very low (57.66Hz) sync rate (remember most LCD panels want 60Hz but some will accept 58~61 at the widest).
Do you have a iScan DVDO VP30/50/50pro you can test with it? If this really is the problem, the DVDO can (in most cases) "unlock" the sync rate (smooth it) to a pure 60.0Hz output.

How is the sync jumper on the HAS set BTW? I'm 99.9% sure the OSSC has locked the sync or it wouldn't display any #Hz I'm just curious (I use unprocessed for basically everything).
 
Last edited by a moderator:
Switch 1 on the OSSC is set to buffered. Maybe I'll try the regenerated later to see if that helps. But that is for the S24, any ideas on the Buccaneers? It doesn't even sync with the OSSC, let alone getting to my TV..
 
Well, I know this is a really strange and not really preferred scenario...
  1. Output from the HAS into Euro SCART
  2. SCART-2-Component adapter (like the CSY-2100/clones)
  3. Component into OSSC
  4. HDMI to TV
Success? :huh:
 
OK, that is a plan for the S24, but I need to buy #2 above to test. Before I do, I'm going to try the old @jassin000 method of using only the SCART out (like your Mortal Kombat 1 board). If that doesn't work, I'll buy the #2 above and test it out.

Any ideas for Buccaneers, since I might be buying extra cables?
 
I say owning a iScan DVDO VP30 is just a good idea, if you ever find one for a reasonable price snap it up.
That's a solid plan S24 or not!

The SCART to component adapters on the other hand...
Meh, I don't know if you want to invest just to test, it might not work (or look great).

Try out the 8-pin mini din to Euro SCART cable first, also try unprocessed sync in addition to buffered and regenerated.
Play around with the H and V sync tolerances of the OSSC.
 
Some arcade boards have a weird sync that the OSSC has trouble latching onto. I’ve personally seen it with the Taito F3 and Irem M72 boards.

In addition to the suggestions already mentioned, @RGB has an adapter you can use to output the HAS to VGA rather than SCART. The OSSC can then latch onto the sync more easily because VGA has separate horizontal and vertical sync signals while SCART combines them.

Using VGA has gotten those difficult boards working on the OSSC for me.
 
That's super classy opt2not. HAS Level Up!

I haven't been keeping up with RGB latest, could I get on a list for 2 RGB extenders when the time comes?
Yeah, RGB's extender is fantastic. I had to opt for it when they were available.

I also like to use a JAMMA right-angle connector with my HAS. I bought it from shadows on the N-G forums, and it helps with space and organization (originally it was supposed to be for my arcade cabinet and bigger PCB's that barely fit in the PCB bay).
Here's an updated shot of my set-up, with shadow's right-angle connector, RGB's extender, 3P4P and HD-15 add-on board.
CO61pKI.jpg

I love my HAS!
Click to expand...
 
electricgrave said:
That's super classy opt2not. HAS Level Up!

I haven't been keeping up with RGB latest, could I get on a list for 2 RGB extenders when the time comes?
Click to expand...
Thanks EG! Good to see you on A-P as well!

Unfortunately, a few pages back RGB mentioned he doesn't have any plans to make more of those extenders because it was too time consuming:


RGB said:
the Goat said:
Are you referring to that JAMMA extension cable? Are they still available? It looks high quality.
Click to expand...
Not available anymore (and no plans to re-stock), I only built like 10-15pcs iirc, they were too time consuming to make:
24041803142_8bb89eb847.jpg
Click to expand...
 
I don't blame him, it was worth a shot but I'm happy with my HAS sets the way they are. It commands royal state but then again PCBs always do so it's not that bad at all. I'm currently using mine on a decent looking wood boards, makes for an easy application for different systems.

Yeah man, good to be here as well seeing so many familiar people.!
 
Hello,

I was thinking about preordering the HAS 3.3 Supergun. I was wondering if the HD Retrovision PS2 component cable will work with the appropriate add on hat? Any help/info would be appreciated.

Thank you,
Rob
 
@lobogau yes the ps1 HD retrovision cable does work with hat. But the ps2 component cable won't work. Because it is a pass thru cable, where as the ps1 converts rgb to component
 
Last edited:
You must log in or register to reply here.
Back
Top