It was my B&O MX4002 television settings. Made some adjustments in service mode.
Service Mode Adjustment Settings
Hfq - Horizontal frequency, Vertical hold. Adjust to avoid picture rolling.
Hph - Horizontal phase, Horizontal position. Higher values move image to the right.
Ham - Horizontal amplitude, Lower values increase horizontal size
Vam - Vertical amplitude, Higher values increase vertical size.
Vsc - Vertical s-correction, expands centre and compresses top and bottom
Vsh - Vertical shift, Higher values move the image towards bottom of screen.
Vli - Vertical linearity, compresses top, expands bottom. lower numbers squash the upper half height of the screen
EWc - East/West corner, shifts the top and bottom horizontally to expand corners. Higher numbers flare the top and bottom L/R corners outwards, lower numbers form a bulge in the middle of L/R sides
EWp - East/West parabola. To make vertical lines at sides of screen parallel with sides of screen
EWt - East/West tilt, trapezoid correction. Tilt the picture. Higher numbers tilt the picture clockwise.