Home Arcade System

@RGB It’s Marvel Vs Capcom (CPS2). Selecting certain helpers after you’ve selected your two heroes can be done via combination of holding Start & more than one button depending on which helper you’d like to use. Selecting Colossus for example requires holding down Start + LP, MP & MK. I can’t do this with the 4.2 without resetting the settings. Psylocke’s (Start + MK) makes the turbo mode come on.

Is there really no way to disable these with a pre 5.0 HAS? :(
 
  • Like
Reactions: RGB
I had a longer break than anticipated :whistling:

HAS is restocked, including the limited colorway bundle (but almost half of the stock is gone already).

Also available:
- RECO V5.1b and accessories
- SNES & SNES Classic Mini to DB15 adapters
- Dual Sega Saturn to DB15 adapter
- HD-15 to SCART cables

Some small changes to the firmware. The HAS finally got a startup screen and some animations. Also, I've added a customer-requested feature that lets you synchronize rapid-fire to the rising or falling edge of the VSync signal.


set_1.JPG


As usual, grab your gear at https://rgbslab.com/

Thank you!
 
haha the menu effects are a nice touch, congrats! ^^

any chance you'd consider H/V-size and position adjust for a later revision?

cheers!
It's one of my projects that's been on the back burner FOR YEARS! The design has changed a few times over the years, but I'm very close to finally finishing it. Picture position is adjusted with the buttons on the board or using the joystick on the control panel, and I plan to add profiles to save the settings. It doesn't seem to introduce any picture drift (tested it for long hours).

It takes up some PCB space, so I'll likely release it as a separate device.

 
niice, well count me in for 3🥹 especially if it does size adjustment on top of position adjustment ^^

I'd be interested in a din to vga adaptor for an older HAS of mine, if you can restock those at the same time, since I moved to vga cables only👍
 
  • Like
Reactions: RGB
Back
Top