Knukle bash + Has supergun + OSSC problem

[zerox_dogma]

Hi guys, I have a problem. I connect my Knuckle bash pcb via HAS supergun to MY OSSC and the only way to see it in my TV is passthrough (1x) (bad quality), when I use x3 the image appear pristine 2-3 seconds and dissapear (blinking).
I use all my pcbs and consoles and works perfect (1x-5x support).
Anyone have any idea? Please help

 

[XtraSmiley]

Yes it's a known problem with Toaplan PCBs and OSSC. There is a EPROM you can change to fix it. Please don't ruin the original EPROM, just burn a fresh one. Details here:

https://shmups.system11.org/viewtopic.php?f=6&t=65035

 

[zerox_dogma]

Yes it's a known problem with Toaplan PCBs and OSSC. There is a EPROM you can change to fix it. Please don't ruin the original EPROM, just burn a fresh one. Details here:

https://shmups.system11.org/viewtopic.php?f=6&t=65035

Oh, thanks for the information, I didn’t know that issue. I’ll read more about that.
Thanks again @xtrasmiley

 

[XtraSmiley]

No problem. I got KB to work by changing some settings (see that thread), but picture was never perfect like other PCBs. The OSSC Pro should be able to fix this if you don't want to do the EPROM thing.

 

[zerox_dogma]

No problem. I got KB to work by changing some settings (see that thread), but picture was never perfect like other PCBs. The OSSC Pro should be able to fix this if you don't want to do the EPROM thing.

Yes, I think I’ll wait ossc pro. I hope it fix the problem.
I don’t want change things in the board