How should I go about making an IO harness? I gotta connect 43 pins to 43 other pins on the button board and I only need 2-3 feet (~ 100 cm) in length. This is for a TTX4 Love Live machine I'm building (I'll post pictures when its all done)
I could cut a bunch of ethernet wire and spend hours working on this (I wouldn't say I have the time to do it either)...
Just wondering if anyone knows any other ways before I start cutting lol
3 month jump update:
I ended up making a harness with a bunch of long schmart female-female wires. (https://schmartboard.com/schmartboard-qty-100-24-red-femalejumper-wires-920-0203-01/)
it was hell, it works, some of them were faulty but yeah... Have fun plugging in 100+ pins!
I could cut a bunch of ethernet wire and spend hours working on this (I wouldn't say I have the time to do it either)...
Just wondering if anyone knows any other ways before I start cutting lol
3 month jump update:
I ended up making a harness with a bunch of long schmart female-female wires. (https://schmartboard.com/schmartboard-qty-100-24-red-femalejumper-wires-920-0203-01/)
it was hell, it works, some of them were faulty but yeah... Have fun plugging in 100+ pins!
Last edited: