MINI DIN 8 to SCART Adapter

[aerobert]

also want to know if this adapter is nice for ossc. any one for sale?

 

[KinG_SoPa]

also want to know if this adapter is nice for ossc. any one for sale?

they are, I might have an extra one, ill check PM me.

 

[aerobert]

they are, I might have an extra one, ill check PM me.

Thanks man but I suspect shipping and fees from the states will make it worth it. :/

 

[oguzog]

Aliexpress link doesnt work anymore for dc booster. can someone enlighten what would be that piece?

 

[oguzog]

Nobody knows which part used for dc booster?

 

[RGB]

You can use the Pololu U3V12F12. Remember that the resistor between the power and the pin #16 should be 180R for +5V and 570R for +12V.

 

[oguzog]

You can use the Pololu U3V12F12. Remember that the resistor between the power and the pin #16 should be 180R for +5V and 570R for +12V.

Thanks for the reply. Do you think this one is equivalent?

https://www.robotistan.com/super-dc-dusurucu-modul

My country sources are very limited.

This is the specs in english

Super Mini DC Step-Down Module - 12V 24V to 5V Step-Down Module

The MINI Super Size (20 x 10 mm) DC Step-Down Converter Power Module is smaller and more efficient, using an integrated molded power inductor and synchronous rectifier control chip. This module can be used in various applications such as DIY mobile power, monitor power supply, power cars, camera power supply, car power, communication equipment power supply, and demanding applications (aerospace models, etc.) due to its precise size and weight.

Super Mini DC Step-Down Module - 12V 24V to 5V Step-Down Module Specifications:

Input Voltage: DC 4.5-24V
Output Voltage: Constant voltage (1.8V 2.5V 3.3V 5V 9V 12V)
Adjustable Range: 0.8-17V, Constant voltage (1.8V 2.5V 3.3V 5V 9V 12V)
Output Current: 3A (max), actual test input 12V output 1.5A
Conversion Efficiency: 97.5% (max) (6.5 - 5V 0.7A)
Switching Frequency: 500KHz
Output Ripple: 20mV (12V - 5V 3A) 20m bandwidth
Operating Temperature: -40°C - 85°C
Output Overvoltage Protection: No
Static Current: 0.85mA
Load Adjustment Rate: +-1%
Voltage Adjustment Rate: +-0.5%
Dynamic Response Speed: 5% 200uS
Output Short Circuit Protection: Yes
Input Transfer Protection: No
Enable Control: Yes

 

[oguzog]

Or this one

https://www.robolinkmarket.com/mt3608-2a-yukseltec-dc-dc-guc-modulu-micro-usb-cikisli

The MT3608 2A Max DC-DC voltage module is a booster board that increases input voltages from 2V to 24V up to 28V. It provides a maximum output of 2A. The output voltage is adjustable. You can adjust the output voltage to your desired level using the screw on the module. The output voltage must be set higher than the input voltage; otherwise, the booster will not activate and the module will not work. It is easy to use and compact. Caution: When continuous current draw exceeding 1A is required, sufficient cooling must be provided. Click here for the Type C model. Specifications:

Maximum Output Current: 2A
Input Voltage: 2V - 24V
Adjustable Output Voltage
Maximum Output Voltage: 28V
Efficiency: Max. 93%
Product Size: 36 mm x 17 mm

Package Contents:

1 x MT3608 2A Max DC-DC module

 

[RGB]

The MT3608-based one will work, but it looks big; I'm not sure if it fits the Scart hood.