AlxUnderBase
Enlightened
@Sir ... did u consider to send a batch of these selectors to @Mitsurugi-w to include with the System 16 multi as an optional tool ?
Last edited:
Really really nice.Starting designing the M72 Remote. Thoughts?View attachment 18142
It will still work completely fine without connecting the reset line but you'll have to power cycle your cab/supergun etc after changing games.I want one for M72 too
BTW, is the System16B selector a solderless install?
I've read the reset line has to be soldered, is it a problem if it's not soldered? (my soldering habilities are below zero level)
16B or M72? M72 is still a ways off and there's no wait list as of yet.please put me down for two! thanks!
I mightThanks for the info
Do you plan on making a selector for the System C2 multi?
I kinda meant.. how does your adapter take over the physical dip that is already on the board that it is being connected to. Does it need to be replaced with yours? or does it connect to the existing one some how?Each position on a 16 way rotary dip switch represents every binary combination of a 4 bank dip switch. If you look at a 4 pin bank : : : : the top row of pins are connected to ground. When a switch is on, it ties whatever is connected to it low.
So all in all the rotary switch is just connecting any combination of the four banks to ground.
That's the way I understand it but I'm definitely no expert here.
There is an 8 pin header next to the physical dip that you connect it to.I kinda meant.. how does your adapter take over the physical dip that is already on the board that it is being connected to. Does it need to be replaced with yours? or does it connect to the existing one some how?