MV2F dimensions for plate.
- Thread starter pierpa86
- Start date
Little confused what you are asking for. Per this thread you seem to already have a MV2F board, but you are asking others for the dimensions of the board?
Hello Guys,
Need an idea to fix a Calendar Error on my MV2F:
Seems im stuck here..
In this area, near the battery i test first 74HC32, desoldered and tested on Tl866 under logic test.
Its pass the test.
On this area i have also changed two diode and ram.
Here i change uPD4990, 32768Hz crystal .....
Need an idea to fix a Calendar Error on my MV2F:
Seems im stuck here..
In this area, near the battery i test first 74HC32, desoldered and tested on Tl866 under logic test.
Its pass the test.
On this area i have also changed two diode and ram.
Here i change uPD4990, 32768Hz crystal .....
Little confused what you are asking for. Per this thread you seem to already have a MV2F board, but you are asking others for the dimensions of the board?
Hello Guys,
Need an idea to fix a Calendar Error on my MV2F:
Seems im stuck here..
In this area, near the battery i test first 74HC32, desoldered and tested on Tl866 under logic test.
Its pass the test.
On this area i have also changed two diode and ram.
Here i change uPD4990, 32768Hz crystal .....
i'm asking for the dimension to cut a plate of plexiglass with correct slot position, all tested from some one...I mean for the base i can simple get the whole dimension of the board, maybe i can not waste material, but for top plate maybe i need some one that have already done / tested correct dimension.
XtraSmiley
Legendary
If not one has one to provide, maybe cut it out of cardboard for a test fit?
Magic Trashman
Beginner
santashiva
Enthusiast
I can't help you with the mv2f (not having this slot model) but it's not very difficult to take the dimensions (you just have to be well organized and precise)
Here is the result I got for an mv2
https://i.postimg.cc/302Bp1Zm/IMG-20250310-1
81632.jpg
Here is the result I got for an mv2
https://i.postimg.cc/302Bp1Zm/IMG-20250310-1
81632.jpg
dude it's me who wrote to you on vinted, nice work!I can't help you with the mv2f (not having this slot model) but it's not very difficult to take the dimensions (you just have to be well organized and precise)
Here is the result I got for an mv2
https://i.postimg.cc/302Bp1Zm/IMG-20250310-1
81632.jpg
Last edited:
Hello Guys,
One more mission is over for me, i'm happy to confirm you all the plate dimension.
I have tested it and its correct !
Now look at my last MVS consolized.
( USB ((Video)) - Coin botton - Power botton - 5V in )
feet and jamma connector cover is coming soon.
One more mission is over for me, i'm happy to confirm you all the plate dimension.
I have tested it and its correct !
Now look at my last MVS consolized.
( USB ((Video)) - Coin botton - Power botton - 5V in )
feet and jamma connector cover is coming soon.