NAC Splitfire: JAMMA streaming solution

[CPZ - SAVEYOURGAMES]

384*224

Can anyone help me?

 

[KmanSweden]

384*224

Can anyone help me?

CPS3 Resolution, pixels: 384×224 (standard mode) / 496×224 (widescreen mode) according to https://en.wikipedia.org/wiki/CP_System_III

You need an upscaler after this card to get 720p or 1080p.

 

[CPZ - SAVEYOURGAMES]

384*224

Can anyone help me?

CPS3 Resolution, pixels: 384×224 (standard mode) / 496×224 (widescreen mode) according to https://en.wikipedia.org/wiki/CP_System_III
You need an upscaler after this card to get 720p or 1080p.

can you tell me some product that I can buy?

I have also an elgato HD60 usb 3 capture device

 

[KmanSweden]

a OSSC or a Framemeister..

 

[CPZ - SAVEYOURGAMES]

oh.... ok thank you very much

 

[kingcar]

I recomend a framemeister. Some capture cards are quite picky with their input resolution.

Since most will accept ony 720 or 1080p
and ossc will just double the resolution giving you:

448 (x2), 672(x3), 896(x4)

Older Capture cards might accept this kind of numbers thou.

So check out what your Capture Card does accept beforehand.

 

[Jangofatt]

I recomend a framemeister. Some capture cards are quite picky with their input resolution.

Since most will accept ony 720 or 1080p
and ossc will just double the resolution giving you:

448 (x2), 672(x3), 896(x4)

Older Capture cards might accept this kind of numbers thou.

So check out what your Capture Card does accept beforehand.

Any suggestions on getting a VGA signal to something the Framemeister can detect? I only use the OSSC just because it has a VGA in.

 

[opt2not]

You guys should make a separate thread to talk about this.

 

[Hatsune Mike]

FINALLY the followup shipment of JAMMA connectors has shipped from Mouser.

It took some time to organize boxes and all that stuff, but I'm collating the lists and going to start reaching out to the next people.

 

[keiichi331]

Yay!!

 

[KmanSweden]

Fantastic.

 

[neopsycho]

Good new

 

[Hatsune Mike]

Sent out a batch of messages and synchronized my list with @hoagtech 's list. Thanks for putting that together.

 

[neopsycho]

You rock

 

[8bitforlife]

hang tough mike =)

 

[hoagtech]

Sent out a batch of messages and synchronized my list with @hoagtech 's list. Thanks for putting that together.

Your welcome. Your Splitfire looks sweet

 

[zionfarm]

Can we get a line through the names or a 20 of 57 shipped have received their units please?

 

[Hatsune Mike]

20 of 57 shipped? Where are these numbers coming from?

The post is @hoagtech 's but I am definitely not going to be updating a big list with each one. Maybe in batches.

 

[zionfarm]

20 of 57 shipped? Where are these numbers coming from?

The post is @hoagtech 's but I am definitely not going to be updating a big list with each one. Maybe in batches.

My bad Mike I was only giving those numbers as an example is all. I totally understand brother keep up the good work.

Blessings

 

[hoagtech]

20 of 57 shipped? Where are these numbers coming from?

The post is @hoagtech 's but I am definitely not going to be updating a big list with each one. Maybe in batches.

I coalated your thread from the beginning.

Their was no mention of fulfillment.

If you send your fulfillment I would be happy to update.