zionfarm
Professional
Here is a screen shot of when I asked for one. Look at the bottom of the screen shot.
NAC Splitfire: JAMMA streaming solution
- Thread starter Hatsune Mike
- Start date
Imrangelica
Beginner
pm sent. Thanks
Kavas
Champion
Interested in one.
Is there a list? Do I pm?
Thanks!
Is there a list? Do I pm?
Thanks!
I was able to get mine installed Monday live on stream.
Instantly I saw the difference between the RetroElektronik.Fr JAMMA 2 SCART adapter I had vs the Splitfire.
Last night, I drank a belt of scotch in your name @Hatsune Mike
Nice piece of kit that adds a lot of value to my Tuesday night Twitch stream.
Instantly I saw the difference between the RetroElektronik.Fr JAMMA 2 SCART adapter I had vs the Splitfire.
Last night, I drank a belt of scotch in your name @Hatsune Mike
Nice piece of kit that adds a lot of value to my Tuesday night Twitch stream.
Yup, seconded. I’ve been streaming with this badboy for over 3 months now. Great piece of hardware, makes the setup so easy and the output paired with a Datapath E1S is perfect.
It also extends my JAMMA Chain. Lol
It also extends my JAMMA Chain. Lol
KmanSweden
Student
Following now.
Likewise!
LOL yeah, I got it all screwed down now. This pic was just after I soldered the "UVC Interceptor" JAMMA connector for testing. But it's all screwed down to stand-offs now.
laevateinn
Student
Can I be added to the waitlist for this?
Just got mine a few days ago and I'm loving it so far. The included box and instruction manual are nice little touches that I appreciate.
I don't have my capture card on hand, but I did test it with my crappy portable LCD, and it looks nice and sharp.
I don't have my capture card on hand, but I did test it with my crappy portable LCD, and it looks nice and sharp.
GuileWinQuote
Enthusiast
I'd also like to be added to the list if possible.
I need one of those! I'm currently trying to hack my own version of this together (with a Jamma2Scart adapter and a 12v soundamp), but this is way too much work, especially since I'm shit at electronics. So yeah, I'd like to order one. Put me on the list please.
drfunk2k
Grand Master
i missed my turn on the list due to covid19 shits....
could i be readded?
put me down for 1 unit!
could i be readded?
put me down for 1 unit!
LemmyBarnett
Student
I'd like to be added to the list please!
Maruchan
Enthusiast
Can anyone lend any advice ? I recently got my Splitfire in the mail, I was previously using a GBS-8220 (rgb to vga).
Since I got the thing in, I was excited to see the difference. But since ever since switching, I haven't been able to get signal to my capture device?
I get audio but that's because I'm doing it from the Cps3 board itself. As for video to the cab, it looks normal. But using the VGA to my capture device then to OBS on my computer, I haven't been able to get video to show.
I tried changing any setting in OBS. The only thing I can get to show is just a black rectangle. I messed with the knobs on the splitfire but no cigar.
I also tried unplugging my capture device a few times but that didn't help any.
Any help is appreciated!
Since I got the thing in, I was excited to see the difference. But since ever since switching, I haven't been able to get signal to my capture device?
I get audio but that's because I'm doing it from the Cps3 board itself. As for video to the cab, it looks normal. But using the VGA to my capture device then to OBS on my computer, I haven't been able to get video to show.
I tried changing any setting in OBS. The only thing I can get to show is just a black rectangle. I messed with the knobs on the splitfire but no cigar.
I also tried unplugging my capture device a few times but that didn't help any.
Any help is appreciated!
Hatsune Mike
Champion
Let's find where in the chain there is an issue - do you get an image from the GBS-8220 when plugged into a monitor directly? Furthermore, is this with GBS-control, or the stock firmware? The GBS-8xxx series is not known for great compatibility or performance when stock, so it would be good to determine if that is working correctly first.
Second, does your capture device not accept 15KHz RGB directly? If you have not tried, it might be worth giving it a shot.
Second, does your capture device not accept 15KHz RGB directly? If you have not tried, it might be worth giving it a shot.
Maruchan
Enthusiast
I was a able to get an image from the GBS to a monitor directly
This was done with stock firmware, and has been working for me for a while now.
Here is how it looked on stream before hand with the stock GBS-8220
( http://www.twitch.tv/dabsandcabs/v/687079659?sr=a&t=1s )
I am also using this capture device
(https://www.amazon.com/dp/B00PC5HUA6/ref=cm_sw_r_cp_apa_i_krngFbGSZ4APX )
Maruchan
Enthusiast
Going to try and connect my GBS-8220 back up and see what gives......
They both use VGA so idk what the problem is. If anyone is using OBS with the Splitfire, can you perhaps provide some pics of your video configurations?
They both use VGA so idk what the problem is. If anyone is using OBS with the Splitfire, can you perhaps provide some pics of your video configurations?