What's new

NAC Splitfire: JAMMA streaming solution

Same here, I'll grab the unit and play with it.
*Note: I thought last year I was down for 2 units; but one is fine. Just let me know if there is a spare, I'll pick it up.
 
Just checking on the semantics...

The printed box is just the cardboard (?) box the splitfire comes in, right? Not a 3d printed enclosure for the pcb itself, right?
 
Satchmo said:
Just checking on the semantics...

The printed box is just the cardboard (?) box the splitfire comes in, right? Not a 3d printed enclosure for the pcb itself, right?
Click to expand...
correct, there will never be an enclosure for the PCB itself during use.

It sounds like everyone would be okay with just the ESD bag, wrapped in bubblewrap, inside a postal box, which is how we used to do it.

If I am able to get the board available from some storefront, either our own or a third party, the box can be used there, and the process of slowly using a list to let people buy them can end.
 
I have plenty of boxes already, I’m fine with just the unit.
 
Hatsune Mike said:
Satchmo said:
Just checking on the semantics...

The printed box is just the cardboard (?) box the splitfire comes in, right? Not a 3d printed enclosure for the pcb itself, right?
Click to expand...
correct, there will never be an enclosure for the PCB itself during use.
It sounds like everyone would be okay with just the ESD bag, wrapped in bubblewrap, inside a postal box, which is how we used to do it.

If I am able to get the board available from some storefront, either our own or a third party, the box can be used there, and the process of slowly using a list to let people buy them can end.
Click to expand...
Thank you. I'll be happy to buy a unit, regardless of box, whenever my turn in line comes.
 
Hatsune Mike said:
correct, there will never be an enclosure for the PCB itself during use.
Click to expand...
That is to say that it shouldn't have an enclosure? What if someone here makes up a sweet looking 3D printed design? Nothing heat related to hurt it right?

Love my Miniguns over the HAS for only the fact that there is an available 3D printed enclosure that makes it super safe-proof and easy to handle. Plus they look sweet :)
 
Kavas said:
Hatsune Mike said:
correct, there will never be an enclosure for the PCB itself during use.
Click to expand...
That is to say that it shouldn't have an enclosure? What if someone here makes up a sweet looking 3D printed design? Nothing heat related to hurt it right?
Love my Miniguns over the HAS for only the fact that there is an available 3D printed enclosure that makes it super safe-proof and easy to handle. Plus they look sweet :)
Click to expand...
I mean, people can do what they want - but not everybody thinks 3D printed cases or acrylic sandwiches are cool :P but nothing bad will happen if you use it. I just mean I will never provide or suggest one.
 
BladeZX said:
You can remove me from the list - I no longer need one
Thanks
Click to expand...
I’ll take his for a total of 2 for me. Unless there is someone on a waiting list. :-)

And I am also fine with how you want to ship out for now.
 
You must log in or register to reply here.
Back
Top