You can use these to swap the harness connectors as needed and not have unplug individual wires.Hopper by what I’ve found so far you have to wire your control panel to a brooks board which then goes to the PS4 I’m presuming, in that case won’t it be a pain to swap from PS4 to tx2 if you’ve got to change the wires every time?
Thanks for that, I’ve put a watch on them for when I find the right pcb converter, cheers.You can use these to swap the harness connectors as needed and not have unplug individual wires.Hopper by what I’ve found so far you have to wire your control panel to a brooks board which then goes to the PS4 I’m presuming, in that case won’t it be a pain to swap from PS4 to tx2 if you’ve got to change the wires every time?
https://www.ebay.com/itm/Cable-2-Pl...t-Borne-Arcade-Jamma-/174106006223?nav=SEARCH
Hopper by what I’ve found so far you have to wire your control panel to a brooks board which then goes to the PS4 I’m presuming, in that case won’t it be a pain to swap from PS4 to tx2 if you’ve got to change the wires every time?
I made up a pair of cables, which is probably easier to buy premade as in the link above, it then just means unplugging the multi pin connectors for sticks and buttons.You can use these to swap the harness connectors as needed and not have unplug individual wires.Hopper by what I’ve found so far you have to wire your control panel to a brooks board which then goes to the PS4 I’m presuming, in that case won’t it be a pain to swap from PS4 to tx2 if you’ve got to change the wires every time?
https://www.ebay.com/itm/Cable-2-Pl...t-Borne-Arcade-Jamma-/174106006223?nav=SEARCH
the wires for the extra buttons are already there.Everyday I think of something else to do with these cabinets, I’ll be glad when I get it delivered lol, the one I’m getting only has 4 buttons and 2 blanks, to make this a 6 button are the extra wires there or will I need an extra wiring loom? I was offered a 2 player 6 button panel for £350 but decided I might as well keep it single player.