snake_eyes_ex
Professional
In for one of these. I've been meaning to do this.
Nanao MS9 Series Monitor Sharpness Mod Kit
- Thread starter Mitsurugi-w
- Start date
Got a few happy people already. Still got a few kits ready before I need to reorder.
It's just a PM away!
snake_eyes_ex
Professional
Got mine. Thanks @Mitsurugi-w!
GravitySandwich
Student
Would love to buy a kit!
Just send a PM.
Hatsune Mike
Champion
I'm late to reply, but if you can add credits and a link to my write up in the PDF and site, I have no problem with you using my images.
Bjt
Enthusiast
Hi, is this kit still for sale + Vga Mod Kit?
Please let me know.
Please let me know.
I have the sharpness kit but I dont stock a vga kit.
_C4m
Beginner
Hiyall, I'm wondering about those diodes. What should the intensity be on those? The ones I have are rated 0.250A and I'm worried of running short. Everything else I already have it on hand.
-Apologies, I intended to post this on the other G1 thread, but I got it wrong
-
-Apologies, I intended to post this on the other G1 thread, but I got it wrong
-
Hatsune Mike
Champion
The current is going to be really low, so it's virtually not going to matter. 250mA should be fine.
_C4m
Beginner
I already did it, I used the ones I had. Great results. TY for putting the guide together 
XtraSmiley
Legendary
I'm getting two of these soon, did anyone ever do the mod and take some step by step pictures?
astro_zombie138
Champion
I've done two of the sharpness mod kits and it's actually mostly just populating. This guide is what I used and just triple checked before each step. Honestly a really easy mod. The trace cut was the worst part but if you do it slowly and use a meter to check continuity it's not bad at all.