plasia Grand Master Joined May 5, 2016 Messages 815 Reaction score 575 Location Mildura, Australia Oct 23, 2020 #1 Has anyone had any experience with this? Works fine with no communication board, install the communication board and I always get error 01. Am I missing some step/setup/setting?
Has anyone had any experience with this? Works fine with no communication board, install the communication board and I always get error 01. Am I missing some step/setup/setting?
M mathieulh Enthusiast Joined Jun 17, 2020 Messages 138 Reaction score 249 Location France Oct 24, 2020 #2 Check and clean the connectors on your communication board, if this still fails, check your voltage on load on the 3.3v line, if it's lower than 3.20v, increase it.
Check and clean the connectors on your communication board, if this still fails, check your voltage on load on the 3.3v line, if it's lower than 3.20v, increase it.