Newcomer looking for advice on SF3 setup

[ForestOfDreams]

You need the cable going from the supergun out?

Most likely that pvm takes bnc cables.

If you can find a 8 pin to bnc that is pry the cable you need.

I use scart into a retrotink so I don't have one I can recommend.

There's also a hdmi mod for these boards that fits the case if you ended up wanting to get it modded later by a pro.

Retro access is under hard times right now so the website is limited but if you email him he would pry make it if he has the components on hand.

 

[djsheep]

@DorianGray If you are going into the PVM you can get this: https://rgbslab.com/products/8-pin-mini-din-to-scart-adapter

Then get this and feed it into your PVM: https://www.retrogamingcables.co.uk...s/scart-adapters/sony-pvm-scart-converter-bnc

That's my workflow, however the HD15 flow you listed above would work the same.

It's worth investigating which upscaler you are planning on and getting and getting the cables that works best with it -- then you've got both bases covered!

Going to great once you get up and running, just a couple of cables away

 

[XtraSmiley]

If the only thing you are going to play is CPS3 then the OSSC is very inexpensive solution for upscaling to a modern display. If you will ever expand your need for a scaler, then the options open up and the prices go up.