Nintendo Super System Arcade restoration

[IonRayGun]

Darn, already ordered a set of side art from Escape Pod.
SNES pads seem like a good solution, especially for missing originals.

Thanks brizzo for the heads up! Going to join that group and see if they are still available!

 

[dremcast]

Shit dude that is sick!
Just wished there where these cabs in Europe as well...

You have one working in arcade planet in Seville Spain

 

[Franco]

Next was the control pannel
This wasnt to hard to remove heat gun and she all came off. then sanded and primed in black paint ready for the new overlay.

New overlay installed

now to find some controllers to suit
i had 4 different ones so id make the best pair out of the four

took apart and made the best set cleaned and adjusted all microswitches and perfection

Now its time to do the body and artwork next ill keep everyone updated

Is there a way to reduce run on the cros controller ? i have two controllers, one is perfect with short run for cross direction use and other one is noisy and twice the run for cross use..why !!

 

[Rtl]

Most likely shit micro switches, open the controller and change them out

 

[Franco]

Most likely shit micro switches, open the controller and change them out

Seems the best are a swiss brand