HI everyone,
I am having issues with using my Naomi outside of my previous cab (Naomi Universal.) Unfortunately I no longer have my cab, so I can't completely rule out that it's not the Naomi mainboard.
I am using RGB's supergun. I can confirm this is working without issue, as I was using it with my MVS before and after trying it with my Naomi.
I can confirm that it was working with a Netboot setup as well with a couple of cartridges inside the cab without issue, but when I try to use it with my PVM, Plasma or LCD (with or without OSSC scaler) I am not getting any image on screen, or hearing any game audio.
I have tried with both an ATX PSU with the proper cable connector as well with a switchable PSU via the Capcom I/O, and I still don't see anything on screen. Voltages seem okay, with 5V up to 5.1v having been tested.
I can hear the fan(s) coming on, and I feel air moving through the vents. I can also see two lights inside illuminated -- one green and one red.
I have tried with both just a cart and with the NetDimm.
I have tried both all dip switches off, and dip switch 1 on, and with video directly outputted form the Naomi, and through the Capcom I/O JAMMA to my HAS v3 supergun.
I'm at a loss. Does anyone think they can diagnose this, or give me some advice to see what's wrong?
I am having issues with using my Naomi outside of my previous cab (Naomi Universal.) Unfortunately I no longer have my cab, so I can't completely rule out that it's not the Naomi mainboard.
I am using RGB's supergun. I can confirm this is working without issue, as I was using it with my MVS before and after trying it with my Naomi.
I can confirm that it was working with a Netboot setup as well with a couple of cartridges inside the cab without issue, but when I try to use it with my PVM, Plasma or LCD (with or without OSSC scaler) I am not getting any image on screen, or hearing any game audio.
I have tried with both an ATX PSU with the proper cable connector as well with a switchable PSU via the Capcom I/O, and I still don't see anything on screen. Voltages seem okay, with 5V up to 5.1v having been tested.
I can hear the fan(s) coming on, and I feel air moving through the vents. I can also see two lights inside illuminated -- one green and one red.
I have tried with both just a cart and with the NetDimm.
I have tried both all dip switches off, and dip switch 1 on, and with video directly outputted form the Naomi, and through the Capcom I/O JAMMA to my HAS v3 supergun.
I'm at a loss. Does anyone think they can diagnose this, or give me some advice to see what's wrong?