rememberizer
Student
I have a PC set up with CRTEmuDriver and it works. My Aero City cab is wired with a stereo amp with a 3.5mm input and works great with all my boards. Using the PC, I don't get any video at all on my Aero City cab unless I connect the audio from the PC to the stereo amp, which makes no sense!
Now, this wouldn't really be an issue, except the picture actually gets messed up whenever a loud sound plays. This means the audio and video ground are shared somehow. I checked the amp and it does combine the input stereo gnd with the cab's common ground, but if I disconnect the ground and power the amp outside the cab I get no video at all!
I tested the video ground all the way from the pc to the monitor chassis and it has continuity, so why doesn't it display anything until audio is connected?
Now, this wouldn't really be an issue, except the picture actually gets messed up whenever a loud sound plays. This means the audio and video ground are shared somehow. I checked the amp and it does combine the input stereo gnd with the cab's common ground, but if I disconnect the ground and power the amp outside the cab I get no video at all!
I tested the video ground all the way from the pc to the monitor chassis and it has continuity, so why doesn't it display anything until audio is connected?