Power supply for CPS 3

[k1701]

Hello all,
I recently got a CPS 3 board with the Darksoft BIOS cart and the SCSI drive,
I would like to know what is the wattage on the power supply needed for the CPS 3.

Can l use my existing power supply which l use on my CPS 2? (133 watts,16A @ 5v, 4A at 12v,)

Thanks!

 

[BuddyC]

CPS3 draws less power than CPS2, so your PSU should be more than adequate.
Just remember to adjust your 5V so it puts out no more than 5,10V.

 

[k1701]

CPS3 draws less power than CPS2, so your PSU should be more than adequate.
Just remember to adjust your 5V so it puts out no more than 5,10V.

Hey Buddy C,Thanks for the response! I wanted to confirm the wattage in case if l damaged the board. I never expected to get a CPS 3 board , l was able to get one locally as part of a package deal!
Once again thanks man!

 

[BuddyC]

Hey Buddy C,Thanks for the response! I wanted to confirm the wattage in case if l damaged the board. I never inspected to acquire one!
Once again thanks man!

No problem! Enjoy all those lovely CPS3 fighters!