What's new

Pre-order: Multi JVS v1.0 new batch

All pre-ordered units are boxed and begin shipping today. The only person that hasn't confirmed their address is still good is @Sp33dFr34k . Just confirm for me and it will ship immediately.

I will have a few more units to sell in a few weeks. Waiting on more LCDs. I will also do another small run for future sales before re-tooling the pnp for the S1 multi.

While you are all waiting for delivery go ahead and download python 3 from here:

https://www.python.org/downloads/

Install somewhere that you can easily access the folder. I installed mine on the C: drive.

Next go to Winteriscoming's github:

https://github.com/winteriscomingpinball/MEGA-JVS

Download the zip file by clicking on the green 'code' button. Extract the files. Place the contents of the folder called "sd card contents" on the root of a microSD card. Make sure to not use the older version of these files. Next place the contents of the folder called "profile editor" in your Python 3 folder. If you installed Python 3 correctly the editor will load when you double-click on profiles.py. A nice GUI will load and ask you to point it to your profiles file. You can then edit the many pre-configured profiles or add a new one of your own.

There are several very good pre-made profiles and you might not need to edit one at all!
 
I sent you my address yesterday and transferred the additional amount for shipping today. Let me know if it's okay.
 
The profile editor UI is not scrollable? I can't see the whole screen without changing my display to portrait mode when I opened it in my computer.
I'm able to see it all on my screen ok. Maybe something to do with screen resolution? It's not our software so I'm not familiar with the inner workings. Hopefully you can make it work for you. Luckily you should't need to use the profile editor too much.
 
As long as your sd card is properly set up it will change to the next profile when you press menu. Cycling through the profiles is part of the test process before shipping so if its not working id suspect my sd card setup.
 
I powered the board via micro usb when I tested the menu button. I didn't connect to any game motherboard yet. I copied "sd card contents" folder from the extracted github zip file to the root of sd card.
How did you test the board? Did you connect to a JVS motherboard like Naomi?
 
Yes. It was connected to a Naomi and powered using the power connectors. Maybe you can only swap profiles after the JVS has made contact with the pcb. I can check this later.
 
Back
Top