plasticfactory
Champion
I definitely want one of these if available.
Project: Helper board for Mitsu's Repro Batman Forever Sound amp board
- Thread starter mathewbeall
- Start date
bender3455
Beginner
@mathewbeall Am I the one pending? I apologize if that's the case, as I don't get on the forums much due to work sending me EVERYWHERE, lol
FLEX 3D
New User
Im interested in one if this is still available.
mathewbeall
Enlightened
Update - just 3 of these left!
LoneWolf24
Beginner
I'd like one please if still available!
chrisapple
Student
mathewbeall
Enlightened
I just sold the last of the 24 that I made in this batch! Hopefully everyone is enjoying theirs! Would be fun to see some pics of them in action!
mathewbeall
Enlightened
I am not sure there will be a next batch - although everything is open sourced in the first post - so you are free to make your own as well.
Likely a dumb/easy question, but just wanted to sanity check wiring wise.
I'm going to use this in my Windy 1, and buttons 1/2/3 will be wired via jamma, buttons 4/5/6 wired to a CPS2 connector and connected to the Everten adapter.
I just wanted to sanity check that this config would allow all the extra buttons in the handful of games that use more than 3 to work properly, and obviously if playing batman I need to flick the switches on this adapter for buttons 1/2/3 to work properly.
Thanks
I'm going to use this in my Windy 1, and buttons 1/2/3 will be wired via jamma, buttons 4/5/6 wired to a CPS2 connector and connected to the Everten adapter.
I just wanted to sanity check that this config would allow all the extra buttons in the handful of games that use more than 3 to work properly, and obviously if playing batman I need to flick the switches on this adapter for buttons 1/2/3 to work properly.
Thanks
mathewbeall
Enlightened
buttons 4/5/6 through a kick adapter should be fine - as those are separate from JAMMA, and yes - just put 1/2/3 back to normal when doing that (one slide switch) and all should be good.
Matt
Matt