Prop Cycle

[bravesirchris]

Can anyone one give me so advice on a Namco Prop cycle. The machine has a issue with the pedal sensor, I've check the power going to the pedal PCB board @5v+

But now i am at a bit of a loses.

 

[jamesv833]

I just looked in the manual and it seems that the encoder it uses is a decal(sticker), I’d take a look to see if it’s dirty or has peeled off.
Have you looked through the manual and performed the steps to test the pedal sensor?
If any parts have been changed it notes you should perform the initialization procedure.

 

[luchex]

Hi Bravesirchris! How are you? I'm writing from Argentina! =) I own a Prop-Cycle and my boards died. Nobody here could repair them, so I have installed a MAME, hacked a mouse and use the original bike to control the game. Let me know how can I help you! I've "studied" that board, jeje. Besides that: I'm looking for the "velocimeter" decal, as mine is gone. Perhaps if you own the original arcade also, you can send me a picture of it, so I can replace it. Thanks in advance!!!