What's new
By:

Questions for Namco Noir owners

The led’s measure 3.5mm x 3.0mm, I removed one but they are very small and not looking forward to replacing any or all! 40 in total. I think an LED strip may be a better option.
49763897431_1e08035975_b.jpg
">
 
Last edited:
That was also my primary idea. I wonder if would be possible tu use a led strip with the same female connector as the noir led panel. I have no access to a soldering station, so I’d need something “plug&play”.
 
Yes that’s what I used, a led strip. I tried a couple of alternate types because they are very bright.

Once I got it working I disconnected it as lights on cabs just annoy me, I always disconnect the marquee light on my cabs too.
 
rocket said:
anyone figure anything out? I saw this anyones thought on this:

https://www.aspectled.com/products/..._color=13&led_strip_waterproofing=8&voltage=4
Click to expand...
Probably cheaper from aliexpress, loads of options here

https://www.aliexpress.com/af/led-s...strip&catId=0&initiative_id=SB_20200606000931

even RGB if you're into that

for brightness just rig up a PWM dimmer and adjust to how you want it, something like this (can be de-cased its a tiny pcb)

https://www.aliexpress.com/item/400...earchweb0_0,searchweb201602_,searchweb201603_
 
What type? The tekken 6 card or the banapass red/blue?
 
Hey, just checking in. I got your email and I’d like to buy the coin door. Did you get my email response?
 
You must log in or register to reply here.
Back
Top