I put together a mounting board that fits the pegs used by the original WeiYa 3129DB remote board and allows fitting a Sanwa PFX remote board in its place.
The following additional materials are used to affix the Sanwa PFX remote to the mounting board:
2x M3 6+6mm male-female nylon standoff
2x M3 x 6mm screws
2x M3 nuts
The standoffs sit between the mounting board and remote, the screws attach behind and the nuts secure the top of the remote to the standoffs.
STL File Available Here: https://www.thingiverse.com/thing:7006403
I hope it's useful for others that have put a FPX in an AWSD.
The following additional materials are used to affix the Sanwa PFX remote to the mounting board:
2x M3 6+6mm male-female nylon standoff
2x M3 x 6mm screws
2x M3 nuts
The standoffs sit between the mounting board and remote, the screws attach behind and the nuts secure the top of the remote to the standoffs.
STL File Available Here: https://www.thingiverse.com/thing:7006403
I hope it's useful for others that have put a FPX in an AWSD.