AnyZeroHero
Beginner
Hi all,
what I have purchased
Sega Naomi 1 Board
GD Rom with serial cable and power cable
Capcom I/O with no cables. (will source these since they are pc parts apart from power connector)
Naomi multi region bios
Sega Naomi Net Dimm Board
tools
U Type IC Chip Extractor Extraction Pull Up Anti ESD Tool for ROM EPROM DIP
Cables from ebay so far
Cable Power Jvs I/o Board Capcom Converter Terminal Arcade Power Supply
Cable Adapter Jvs ATX Power Terminal Arcade Naomi Power Supply 3,3v(this i think was the wrong choice)
Discs
Sega OutRun2 SP Special Tours Firm Update For CF-BOX GDX-0024A GD ROM (this could be wrong for my board)
https://www.ebay.co.uk/itm/Sega-Out...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
planning on powering from pc power supply to begin with since i have a few around.
some background of my purchases
i feel like i have rushed into this at the beginning and have made some mistake purchases such as disc above and power cables.
The one i am having most trouble with is the condition of Naomi board i have since its ports are all rusty and was not clear from ebay seller which I have raised a case with.
knowledge gap is what buttons to buy and harness which is another thing i would like some guidance on.
Thank you for reading and hope this make some sense.
what I have purchased
Sega Naomi 1 Board
GD Rom with serial cable and power cable
Capcom I/O with no cables. (will source these since they are pc parts apart from power connector)
Naomi multi region bios
Sega Naomi Net Dimm Board
tools
U Type IC Chip Extractor Extraction Pull Up Anti ESD Tool for ROM EPROM DIP
Cables from ebay so far
Cable Power Jvs I/o Board Capcom Converter Terminal Arcade Power Supply
Cable Adapter Jvs ATX Power Terminal Arcade Naomi Power Supply 3,3v(this i think was the wrong choice)
Discs
Sega OutRun2 SP Special Tours Firm Update For CF-BOX GDX-0024A GD ROM (this could be wrong for my board)
https://www.ebay.co.uk/itm/Sega-Out...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
planning on powering from pc power supply to begin with since i have a few around.
some background of my purchases
i feel like i have rushed into this at the beginning and have made some mistake purchases such as disc above and power cables.
The one i am having most trouble with is the condition of Naomi board i have since its ports are all rusty and was not clear from ebay seller which I have raised a case with.
knowledge gap is what buttons to buy and harness which is another thing i would like some guidance on.
Thank you for reading and hope this make some sense.