Socket Bios ripped pads.....need some guidance

[s8n]

hi guys, I attempted to socket one of my AES's and ripped some pads in the process.

Anyways I believe I have achieved all bottom Patch wires. Unfortunately I get the pics below

Should I be looking and probing at the top side as well ?. I have another AES that I can refer to during the process.

 

[ack]

Be mindful that some traces might not be point to point going to the bios, but instead connect up to a bios pin and continue on to some 3rd chip. The pictures give the impression there is something wrong with at least data line 1 going to the LSCP2-A2 chip. I would compare continuity of the data lines between bios chip and LSCP2-A2 on your 2 boards. I think at a minimum pin 18 on the bios chip won't have continuity on your bad board.

 

[Neo-Alec]

Start where ack mentioned, and then check everything: