Solid Screen Issue

[Maxmillian]

Hi Everyone

I recently bought two CPS2 Multi Kits andone of them installed on the CPS2 B-7 Board (killed) with palG.
I have carefully installed all the Parts, likein the Instructions.
After the installation I have met a strangesituation.
I can flash a game on the Micro SD card andI can even play.
But when I restart my CPS2, then I get onlysolid screen (Grey, Green, White etc….)
As far as I know when I restart CPS2, thenthe game, which I played last time, is run automatically. But I get onlysolid-screen.
I don’t know what the problem is.
If someone already has experience, thenplease let me know how I can solve the problem.
I ask you for your understanding and waitfor positive answer.

Best Regards


P.S I have filmed the problematic Situation

Solid Problem Issue <---- Click this Link, to watch

LCD says Now Playing.... but only solid screen

reflash a rom

it works.....but

after reboot cps2 get sold screen again.....

 

[Mitsurugi-w]

Remove the SD card and turn the power on without the card inserted. If it boots the last game you loaded then you have a bad SD card. I had this problem just the other week with a customer's kit I had in for repair. Was caused by the SD card.

 

[l_oliveira]

What version is your B board sir? it has CN9 in it?

 

[Maxmillian]

Thank you Mitsurugi-w
As you explaind me the Solid Screen Problem was the compatability of the Michro SD card.

I filmed, the Problem to solve.

The Solid Screen Problem was the compatability of the Michro SD card. <--- Click this Link, to watch

//l_oliveira : I hav got 93646B-7 B Board and I've wired between SWD5 and CN9