Starcade
Enthusiast
I have acquired some one player Tekken 5 & Tekken 5 DR control panels with the card readers built in. The problem is, not one of them had the harness going from the S CON V PCB to the Excard on the System 256 so I decided to make my own. I have built a few for my control panels and wondered if there was any demand for them. The leads are colour coordinated (with the System 256 manual wiring), are approximately 1.2m long (ample length) and are protected with a plastic reinforced shielding. The harness is a precise replica build of an original Data Card Lead for use in a Blast City cabinet. The power harness for the S CON V PCB is wired for the 2 player input control header for a Blast City cabinet (although I can modify this to provide power from any +5V source if you wish). The cables are tested working. I have only made the 1 player harness but I have the capacity to make the 2 player side if required. Looking for $20 per cable (excluding postage) to cover my material costs and build time.