Taito Egret II PSU Adapter
- Thread starter Derick2k
- Start date
thats the spirit. idk how im gonna mount my psu yet so i couldnt give a definitive answer
West
Grand Master
Hey man! I'll take one if there are any still available.
They are, im finalizing the layout/measurements of the PCB and will be placing an order, already have connectors on order.
I wanted to do a 3d printed case, but not sure I will have time for that.
Also are most of these gonna be installed vertical or horizontal?
I wanted to do a 3d printed case, but not sure I will have time for that.
Also are most of these gonna be installed vertical or horizontal?
I'll probly install mine yoko
Yup, Im feeling the right angle connectors more than the verticals. Think I will go with that.
Gonna order the pcbs tonight after I double check things.
Someone shoot me over a pic of the wire harness end just to confirm things, how it plugs into the stock amp etc..
Gonna order the pcbs tonight after I double check things.
Someone shoot me over a pic of the wire harness end just to confirm things, how it plugs into the stock amp etc..
andynumbers
Professional
Put me down for 4. I'm using a ghetto homemade wire adapter right now.
Any time I have a nice piece of flat cardboard left over from something now I stash it for exactly this purpose. The best instant prototype sanity check material!
Hackcell
Grand Master
If it works with a RT-125A, I'll order 2!!
It will, thats the psu I was testing on.
Hackcell
Grand Master
Awesome! Pls add me to the list
OK, I think I'm good to order the PCBs, these are as simple as they are gonna get.
If you don't need the voltmeter it can be left out along with the switch
I have a few different ones on order for the voltmeter to see how they fit.
If anyone has any requests or changes they would like to see please let me know.
If you don't need the voltmeter it can be left out along with the switch
I have a few different ones on order for the voltmeter to see how they fit.
If anyone has any requests or changes they would like to see please let me know.
perfection!
jcmorrisii
Grand Master
Looks great!OK, I think I'm good to order the PCBs, these are as simple as they are gonna get.
If you don't need the voltmeter it can be left out along with the switch
I have a few different ones on order for the voltmeter to see how they fit.
If anyone has any requests or changes they would like to see please let me know.
West
Grand Master
Indeed, looks awesome with all the additions. Sick work man!!
ok ordered some PCBs, this is basically how it will be
The center switch and connector are not needed at all
the PCBs will come with the voltmeter, switch, and the 2 bottom connectors
If you don't need the voltmeter can be left out, the switch for the voltmeter will come pre-soldered cause it's one less step for me to do and not have hold onto more parts, etc...
These have really fat traces, they are doubled up, this is a 4-layer, higher temp board. They will be green with gold as those get fabbed the fastest.
Once I have them in hand will send a few to a couple of members to test.
I will be selling these in kit form at cost basically or preassembled and tested for an added charge. I have red or blue voltmeters if you have a preference.
The center switch and connector are not needed at all
the PCBs will come with the voltmeter, switch, and the 2 bottom connectors
If you don't need the voltmeter can be left out, the switch for the voltmeter will come pre-soldered cause it's one less step for me to do and not have hold onto more parts, etc...
These have really fat traces, they are doubled up, this is a 4-layer, higher temp board. They will be green with gold as those get fabbed the fastest.
Once I have them in hand will send a few to a couple of members to test.
I will be selling these in kit form at cost basically or preassembled and tested for an added charge. I have red or blue voltmeters if you have a preference.
Last edited: