Taito Type X3 - What do I need to run it?

[PascalP]

Is this a P&D touch monitor?, in case anyone is interested

https://buyee.jp/item/yahoo/auction/g209937546

 

[Derick2k]

Is this a P&D touch monitor?, in case anyone is interested

https://buyee.jp/item/yahoo/auction/g209937546

Yup, works great with with a P&D X3.

 

[PascalP]

Can anyone tell the specs of the PSU for that monitor?
Got the monitor in, but no PSU included unfortunately...

 

[Derick2k]

I used this one

https://www.amazon.com/dp/B0023Y9EQC/ref=cm_sw_r_cp_dp_T2_lJ6szb8J4Q331

So a 12V 5A power brick should do the trick.

 

[PascalP]

Is that a 5,5x2,5mm plug with negative outside and positive inside?

 

[Derick2k]

Is that a 5,5x2,5mm plug with negative outside and positive inside?

Yup, should be.

 

[Trickyj99]

Sure let me go take some pics, I also have the manual with the schematics if that helps.

Hi do you have a copy of the x3 manual please

 

[Trickyj99]

Hi do you have a copy of the x3 manual please

Thanks if you can let me know