04/30/22 Preorders for these are CLOSED!
For another batch I would need another 12 marquee pieces ordered since I have to buy full sheets of this acrylic
Hey guys,
I'm doing a poll to see if there is interest in "proper" repro vewlix marquees.
These will have:
Porper acrylic, may not be 100% what Taito used, but it's damn close, cause I cant tell the difference.
Reflective foil tape for the edges (this may be pre-applied or you might have to do it yourself, only because I've never dont that so.... we will see how it goes)
Stepped edge, to hold art at the right level
Nuts/bolts like the original - @jassin000 is taking care of these so I dont have to hunt them down.
Front flexible sheet This piece needs to be die-cut and will just add more to the cost. I will revisit this later to see how much it would cost, but I wont be including these.
The price will not be cheap, I'm estimating about $125 per set before shipping. And this is solely due to the fact that a sheet of the specialty acrylic cost from $8-900 alone and I would have to buy a whole sheet at a minimum. That's just the sheet before any processing, shipping, cutting, etc...The flexible front sheet needs to be die-cut, so there's added expense there.
Preorders - Need 10x $100 deposits to go into production. The estimated time is about 6 weeks, I have no control over this, there are only 3 authorized distributors of this acrylic in the country.
PAID:
@Eddie Amsel x2
@thomas3184 x1
@KinG_SoPa x1
@HalfODonut x1
@ItsBobDudes x1
@muffman x2
@Magus Incognito x2
@GumGum x1
Interest:
@jassin000 x2
For another batch I would need another 12 marquee pieces ordered since I have to buy full sheets of this acrylic
Hey guys,
I'm doing a poll to see if there is interest in "proper" repro vewlix marquees.
These will have:
Porper acrylic, may not be 100% what Taito used, but it's damn close, cause I cant tell the difference.
Reflective foil tape for the edges (this may be pre-applied or you might have to do it yourself, only because I've never dont that so.... we will see how it goes)
Stepped edge, to hold art at the right level
The price will not be cheap, I'm estimating about $125 per set before shipping. And this is solely due to the fact that a sheet of the specialty acrylic cost from $8-900 alone and I would have to buy a whole sheet at a minimum. That's just the sheet before any processing, shipping, cutting, etc...The flexible front sheet needs to be die-cut, so there's added expense there.
Preorders - Need 10x $100 deposits to go into production. The estimated time is about 6 weeks, I have no control over this, there are only 3 authorized distributors of this acrylic in the country.
PAID:
@Eddie Amsel x2
@thomas3184 x1
@KinG_SoPa x1
@HalfODonut x1
@ItsBobDudes x1
@muffman x2
@Magus Incognito x2
@GumGum x1
Interest:
@jassin000 x2
Last edited: