J
jassin000
It was easy to peel off, I just soaked a rag in acetone and held it to the edge until it started to soften up enough to peel back.You wont have the anti-glare coating but if your going to strip it off anyways....
It was easy to peel off, I just soaked a rag in acetone and held it to the edge until it started to soften up enough to peel back.You wont have the anti-glare coating but if your going to strip it off anyways....
Great idea about removing the inner layer. The haziness was bothering me and I've even thought about not having the glass at all. But this is a much better option.It was easy to peel off, I just soaked a rag in acetone and held it to the edge until it started to soften up enough to peel back.You wont have the anti-glare coating but if your going to strip it off anyways....
Yeah, the best stuff to use in these cases. Only know cause I had to replace glass on pinball and the museum stuff is the best, super clear and basically no reflections, its almost like its not there.Museum glass, now that’s an excellent idea @Derick2k.
The original frame/glass is reused/recycled, you drill out 6 holes (3 on bottom edge, 3 on top) to mount the new bracket/LCD inside.Does the old glass just fit in the frame and you put the new monitor behind it?
Website is open for orders it looks like?I hope I can get this as soon as I can. I think my monitor died on my Vewlix.
I had to order from 2nd batch, or my order would not go through. Yeah, I think these are gonna be very popularbaaaaah sold out,
I highly recommending getting the countersink bit with the bracket.I guess i could save some money with the countersink drill bit buying it elsewhere but i was getting confused with the screw sizes and degree angles
Are these not pre-drilled because it depends on which replacement monitor we buy?I highly recommending getting the countersink bit with the bracket.Also when you use the bit/drill out the 6 holes... Go slow and use a screw to judge the proper depth.
You don't need to go that deep (only make the screw head flush) and with this type of drill bit you can just blast it right thru if you aren't careful/go slow.