Thanks man! I looked for a while, must have missed it...
Any guidance on the Circuit Python .UF2 before I go flash all of these?
Universal Multi-Kit LCD Selector
- Thread starter twistedsymphony
- Start date
Any guidance on the Circuit Python .UF2 before I go flash all of these?
just follow the steps in the github read me. it's all just dragging and dropping files, super easy
https://github.com/twistedsymphony/...tting-up-a-software-release-on-a-new-selector
It was the question I asked above that I wanted an answer to.
Don't worry, I'll just use the explicit version of the .uf2 you linked, which is outdated, but obviously recommended. Thanks.
Ah I didn't realize they finally released 10.x for this I haven't tested it but there's no harm in trying.
Circling back to say that 10.x didn't work. Rebooted back to "FTHRS2BOOT" after dropping it over.
Using the suggested version on Git worked a treat and rebooted to "CIRCUIT PY" with no issue.
Also reporting in that the process works just fine on a Mac.
Loaded up System 2, System 18, M92 and MVG460 sets with no issues. Looks fantastic in person. Can't wait to finish these off and get them up and running. Great work @twistedsymphony, and thanks for sharing!
that's a shame as I think that 10.x includes some improvements that might fix the web-interface issues. I'll have to see what's up with it once I have some time.
Gamesmonkey
Professional
Ok, here are my versions.
M92
https://limewire.com/d/GPuQN#g1nHq5Shg5
System 1 Namco
https://limewire.com/d/tItsy#tePpSfiuVJ
CPS1
https://limewire.com/d/wXAo9#2wqPnfz12N
M92
https://limewire.com/d/GPuQN#g1nHq5Shg5
System 1 Namco
https://limewire.com/d/tItsy#tePpSfiuVJ
CPS1
https://limewire.com/d/wXAo9#2wqPnfz12N
The clarity of the screen is amazing and the supplied M92 logos look great.Keen to see how they turn out for M92 usage
The selector is a lot smaller than standard selectors. But that’s not a bad thing.
I’ll hopefully have yours finished by the weekend and off.
these screens continue to impress me, seriously pictures I've been able to take don't do it justice.
I had some time to investigate the python 10.2.x release.
it seems that 10.x uses an updated UF2 bootloader. so the bootloader needs to be updated before circuit python 10 it can be installed.
Initial tests seem to show my current selector code running on it ok.
I'd recommend people stick with 9.8 for now as there are a couple of extra steps involved to get 10.x running and there's little benefit to it right now.
