Paranoid_Andy
Enthusiast
Sorry for my delay.
I have been busy and I wanted to do some thorough testing. I have some very strange results that I don't understand yet lol.
@PascalP My apologies but I'm not sure where on the Neo-Geo I would look for my 5V setting. I see a potentiometer on it, but I though that was for audio? When I turn on the system, the supergun says it has 5.02V if that helps? If there is something specific you would like me to test, I would be happy to, I just need some instructions please.
@Darksoft I have much information for you. I will list it below. I have also made 2 videos while I was testing different SD cards. I'm sorry they are a little long, but I was trying to provide much information for you.
Here are pictures of my setup: Images
It's not plugged in because I had to take it out of my cabinet for pictures.
-The grey box under the power supply is just a plastic box. It holds the power supply up so the controller outputs on the supergun fit under it. There are 2 Super Nintendo controller adapters attached to the supergun under the grey box.
-I use SCART out of the supergun to my OSSC line doubler.
-Kick harness is plugged in, but nothing is attached to it and the ends just hang there when not in use.
Before I made the videos:
-Tested 16GB PNY SD card with Pulstar. Booted to same red text.
During Video Summary:
Strange things happened.
Tested on 32GB Samsung SD card.
-Pulstar booted to red screen in slot 1 with slot 2 & 3 empty.
-Shock Troopers and Twinkle Star both work even when more slots are used now. (Confusing)
-Magician Lord still has audio issues sometimes.
-Tried Pulstar again in slot 3. Now it works! (More confusing!)
-Load Alpha Mission 2 to slot 1, Pulstar to slot 2 and Sonic Wings 3 to slot 3. (Now Alpha Mission 2 is restarting, this game worked before in my original post video. Pulstar still works.)
-At about 8:50 in Video #2 I swap to 16GB PNY SD card.
-I try Pulstar again but the world explodes.
-Try again with Pulstar in slot 1, Alpha Mission 2 in slot 2, Blues Journey in slot 3. (Pulstar works. Alpha Mission 2 still resetting. Blues Journey seems fine except audio crackle.)
Video 1
Video 2
Other information:
-CPS2 Multi works fine without any known issues.
-CPS1 Final Fight, Guardians, Aliens, Crime Fighters, Shadow Force and Neo-Geo 161-in-1(using UNIBIOS 3.2) all work fine without any known issues.
-I tried removing and inserting the Neo-Geo Multi to make sure it was a good connection. Contacts are all clean.
-Original SD card in my first post is 32GB Samsung. Other SD card is brand new 16GB PNY. Both were formatted FAT32 prior to copying games.
-All my testing from the start of this posting has been done on OG BIOS.
WHEW!
I have been busy and I wanted to do some thorough testing. I have some very strange results that I don't understand yet lol.
@PascalP My apologies but I'm not sure where on the Neo-Geo I would look for my 5V setting. I see a potentiometer on it, but I though that was for audio? When I turn on the system, the supergun says it has 5.02V if that helps? If there is something specific you would like me to test, I would be happy to, I just need some instructions please.
@Darksoft I have much information for you. I will list it below. I have also made 2 videos while I was testing different SD cards. I'm sorry they are a little long, but I was trying to provide much information for you.
Here are pictures of my setup: Images
It's not plugged in because I had to take it out of my cabinet for pictures.
-The grey box under the power supply is just a plastic box. It holds the power supply up so the controller outputs on the supergun fit under it. There are 2 Super Nintendo controller adapters attached to the supergun under the grey box.
-I use SCART out of the supergun to my OSSC line doubler.
-Kick harness is plugged in, but nothing is attached to it and the ends just hang there when not in use.
Before I made the videos:
-Tested 16GB PNY SD card with Pulstar. Booted to same red text.
During Video Summary:
Strange things happened.
Tested on 32GB Samsung SD card.
-Pulstar booted to red screen in slot 1 with slot 2 & 3 empty.
-Shock Troopers and Twinkle Star both work even when more slots are used now. (Confusing)
-Magician Lord still has audio issues sometimes.
-Tried Pulstar again in slot 3. Now it works! (More confusing!)
-Load Alpha Mission 2 to slot 1, Pulstar to slot 2 and Sonic Wings 3 to slot 3. (Now Alpha Mission 2 is restarting, this game worked before in my original post video. Pulstar still works.)
-At about 8:50 in Video #2 I swap to 16GB PNY SD card.
-I try Pulstar again but the world explodes.
-Try again with Pulstar in slot 1, Alpha Mission 2 in slot 2, Blues Journey in slot 3. (Pulstar works. Alpha Mission 2 still resetting. Blues Journey seems fine except audio crackle.)
Video 1
Video 2
Other information:
-CPS2 Multi works fine without any known issues.
-CPS1 Final Fight, Guardians, Aliens, Crime Fighters, Shadow Force and Neo-Geo 161-in-1(using UNIBIOS 3.2) all work fine without any known issues.
-I tried removing and inserting the Neo-Geo Multi to make sure it was a good connection. Contacts are all clean.
-Original SD card in my first post is 32GB Samsung. Other SD card is brand new 16GB PNY. Both were formatted FAT32 prior to copying games.
-All my testing from the start of this posting has been done on OG BIOS.
WHEW!