SBZack
Enthusiast
WTB vewlix control panel lock piece
- Thread starter SBZack
- Start date
Want To Buy
Kujako
Champion
Ditto... I have a mostly working solution I jerry rigged together, but would love an actual part.
thomas3184
Grand Master
I’m not sure if @Battlesmurf has this reproed.
Kujako
Champion
thomas3184
Grand Master
You would simply email OVS@taito.co.jp asking to buy it. It will cost a lot and shipping will cost a lot so would only recommend if you need to buy a bunch of other stuff that you can’t find locally or really want brand new.
Battlesmurf
Grand Master
I can reproduce this easy enough- but as others are saying- pretty sure Taito stocks them. It would benefit a bunch of you fellas to get together and get all the parts you need- get one package from japan and ship a bunch of them out when it lands stateside. They take wire transfer.
Kujako
Champion
I’m traveling right now, but if someone in the US were to do a group order, put me down for one.
Kujako
Champion
Back from my travels (went to see Rifftrax live) and got the following information from Taito.
So, $42.87 USD per unit with $58.33 shipping and a minimum order of $72.91 by my calculations (someone check my math). Forty three dollars is a lot for a small bit of metal... and would need to get at least two of them to meet the minimum order. So what do we all think?
So, $42.87 USD per unit with $58.33 shipping and a minimum order of $72.91 by my calculations (someone check my math). Forty three dollars is a lot for a small bit of metal... and would need to get at least two of them to meet the minimum order. So what do we all think?
thomas3184
Grand Master
Yes, that is completely accurate; hence, only buy from taito if you cannot get it elsewhere.
socalcade
Professional
Holy moly surely just 3d print one out of PETG unless you're an arcade
Kujako
Champion
To add to this, I had an 'S' shaped cam in my lock picking miscellaneous pile that works fairly well. I have no specs on it, but I bet we could figure out a place to get some more...
Battlesmurf
Grand Master
I might have some of the above- if the fella above can take some measurements, I can compare to make sure and you fellas can DM me to grab one. Seems like the quickest, cheaper option.
Alternatively, I can fabricate- but they're likely to be a similar price to the Taito (30-50 ea) just based on the time it'll take- but I think I can simplify the design a little for time/cost so who knows.
Thanks!
Alternatively, I can fabricate- but they're likely to be a similar price to the Taito (30-50 ea) just based on the time it'll take- but I think I can simplify the design a little for time/cost so who knows.
Thanks!
Kujako
Champion
I can try to do some measurements this weekend. I do now have original locks, but am still using a makeshift cam.
SBZack
Enthusiast
If you manage to recreate one id buy one for sure. I will try to pull one of the others that I own to measure. Would a standard tape measurer be accurate enough?
Kujako
Champion
I’ve got some good digital calipers I’ll use.
Kujako
Champion
OK, here's what I have.
The 'S' cam is about 50mm in length and 19mm wide with a 7mm 'S' curve mid way through it.
The lock is about 17.5mm in depth. This is a standard LY-1153 lock as would originally be on the hardware.
No washers or other spacers outside of the cam lock are used.
The 'S' cam is about 50mm in length and 19mm wide with a 7mm 'S' curve mid way through it.
The lock is about 17.5mm in depth. This is a standard LY-1153 lock as would originally be on the hardware.
No washers or other spacers outside of the cam lock are used.
Battlesmurf
Grand Master
OK, here's what I have.
So I have 2 exactly like this. I can also reproduce the original. DM if anybody needs these bits!The 'S' cam is about 50mm in length and 19mm wide with a 7mm 'S' curve mid way through it.
The lock is about 17.5mm in depth. This is a standard LY-1153 lock as would originally be on the hardware.
No washers or other spacers outside of the cam lock are used.