What's new

mugen_ketsueki

Enthusiast
Joined
Apr 2, 2017
Messages
268
Reaction score
84
Location
Jersey City, NJ
If anyone has a JVS I/O Type 3 board (Sega 837-14572) for sale with the cables and etc please let me know. I am needing this to be able to play my Ring Edge 2 Multi since the Capcom I/O will not work with it.
 

mugen_ketsueki

Enthusiast
Joined
Apr 2, 2017
Messages
268
Reaction score
84
Location
Jersey City, NJ
USB at least cause imma use it on a supergun so i know a kick harness would need to be made but at least something so i can play the games on it with either 4 to 5 buttons
 

twistedsymphony

Enlightened
Staff member
Immortal
Joined
Jul 21, 2015
Messages
10,438
Reaction score
10,285
Location
NH, USA
you're going to need to make a lot more than a kick harness..

you do know what the Type 3 JVS IOs look like right?

837-14572.jpg


it uses the same pinout as the type 1
io_naomi_jvs.gif


if you're trying to hook this up to a supergun you're going to have to build a whole custom JAMMA harness for it.
 

skate323k137

Grand Master
Joined
Jul 23, 2015
Messages
1,435
Reaction score
1,008
Location
Michigan
Instead of a supergun, for a non cabinet Ringedge setup I use a type 3 IO with @Mitsurugi-ws S-JIHP board. I made DB15 to DB25 adapters and use neo style joysticks (or UD converters). For AV I just use normal VGA monitor and PC speakers.
 
Last edited:

mugen_ketsueki

Enthusiast
Joined
Apr 2, 2017
Messages
268
Reaction score
84
Location
Jersey City, NJ
you're going to need to make a lot more than a kick harness..

you do know what the Type 3 JVS IOs look like right?

837-14572.jpg


it uses the same pinout as the type 1
io_naomi_jvs.gif


if you're trying to hook this up to a supergun you're going to have to build a whole custom JAMMA harness for it.
Geez if i knew anyone who would do that that be great lmao.
 

Derick2k

Immortal
Joined
Nov 14, 2015
Messages
9,104
Reaction score
8,722
Location
NYC, USA
I might have a spare rev b / something with a jamma edge. Not sure if ringedge works with it, but I could check
I think it should, another member said it did iirc. I think the RE checks the io id to be a sega. This would probably be the easiest route for the OP to go. I know I have a couple of these but God knows when i can find them lol. I have been redoing all my consoles so have sorta gone down a rabbit hole, getting them mods etc...
 
Last edited:

mugen_ketsueki

Enthusiast
Joined
Apr 2, 2017
Messages
268
Reaction score
84
Location
Jersey City, NJ
I might have a spare rev b / something with a jamma edge. Not sure if ringedge works with it, but I could check
I think it should, another member said it did iirc. I think the RE check io id to be a sega. This would probably be the easiest rout for the OP to go. I know I have a couple of these but God knows when i can find them lol. I have been redoing all my consoles so have sorta gone down a rabbit hole, getting them mods etc...
if you have extra that you find let me know
 

Derick2k

Immortal
Joined
Nov 14, 2015
Messages
9,104
Reaction score
8,722
Location
NYC, USA
I might have a spare rev b / something with a jamma edge. Not sure if ringedge works with it, but I could check
I think it should, another member said it did iirc. I think the RE check io id to be a sega. This would probably be the easiest rout for the OP to go. I know I have a couple of these but God knows when i can find them lol. I have been redoing all my consoles so have sorta gone down a rabbit hole, getting them mods etc...
if you have extra that you find let me know
Ill see if I have one at home this weekend, if not, they are in storage units, so that will take a bit longer to go through. Will let you know.
 

ekorz

Multi Boyz 4 Pi
Legendary
Multi Boyz
Joined
Aug 21, 2016
Messages
4,125
Reaction score
4,745
Location
Boston, MA
tWTL8L1_d.webp


Rev B seems fine, I booted up a couple games. It plugs in via the jamma edge. I think you have to add kicks to one of the headers. They were like $30 all day on YAJ but here’s one for $60 shipped https://www.ebay.com/itm/154094415352 though I didn’t look for more than 5 seconds!
 
Last edited:

mugen_ketsueki

Enthusiast
Joined
Apr 2, 2017
Messages
268
Reaction score
84
Location
Jersey City, NJ
Vga is for video? I assume? Tho I don’t need it? Mainly the USB to the JVS port then get a kick harness made correct?
 

mugen_ketsueki

Enthusiast
Joined
Apr 2, 2017
Messages
268
Reaction score
84
Location
Jersey City, NJ
may i ask if you know based on the multi is mainly all of them around 4 to 5 buttons? if so i wouldn't need a kick harness then if it mentions 5 buttons is on the Jamma.
 

skate323k137

Grand Master
Joined
Jul 23, 2015
Messages
1,435
Reaction score
1,008
Location
Michigan
Buttons 1 thru 5 are on the JAMMA edge, you'll need an extra loom for B6. Having 1 thru 5 on JAMMA made the rev B JAMMA IO very compatible in blast city cabinets.
 
Top