- Thread starter rtw
- Start date
It should work with all SEGA JVS IOs, what is the error you are getting ?
I use mine with an 837-13551 with no issues.
I'm getting a weird error - menu launches ok, I select a game and I just get a black screen with the game playing blind, tried it in two different Type-X's I'm sure it worked fine in my old one..
I thought it might be the video card so downloaded atiflash & 9600SE bios and tried flashing a connect 3D 9600SE but I just get "adapter not found" If i try to read the bios off the Taito ATI card I get the same error.
I've spent ages trying to work out what's going on - it's bugging me as I've lost the dongle for my original castle shig III drive so it sits there with error 900 and I fancied a game or two.
Dips 1 & 4 are on rest off and I assume you need a Taito 9600SE rather than a generic one for it to work?.
I thought it might be the video card so downloaded atiflash & 9600SE bios and tried flashing a connect 3D 9600SE but I just get "adapter not found" If i try to read the bios off the Taito ATI card I get the same error.
I've spent ages trying to work out what's going on - it's bugging me as I've lost the dongle for my original castle shig III drive so it sits there with error 900 and I fancied a game or two.
Dips 1 & 4 are on rest off and I assume you need a Taito 9600SE rather than a generic one for it to work?.
Is this a pure unmodified TAITO Type X with the same CPU and video board as the original i.e. a TAITO 9600SE ?
The DIPs are not used on the original TTX, they are hidden behind a plastic shield, they should all be set to 0.
You cannot use DVI directly, the card does not enable it, you must use the DVI->VGA adapter.
The DIPs are not used on the original TTX, they are hidden behind a plastic shield, they should all be set to 0.
You cannot use DVI directly, the card does not enable it, you must use the DVI->VGA adapter.
I have tried with a bunch of 9600 cards, but haven't managed actually read or flash anything due to this issue.
I've read others having more success when booting with a PCI graphics card with the AGP card disabled, but it was a hassle finding a PCI card.
It could also be the Bios/motherboard - so i would probably need to find another mobo to test again...
Anyone having success flashing 9600 era cards?? Share your secrets!
https://www.arcade-projects.com/threads/a-freeware-taito-typex-multigame.5926/post-223573
Should be possible to get the TTX to boot in pure DOS mode IIRC it's just a few bytes in the MBR which are needed to allow the TTX to boot.
I've tried forcing the bios to boot using onboard video and not AGP and tried different adapter numbers but no joy. Have re-downloaded the image and used Hdd guru rawcopy to write it to an ide drive to check if my drive was corrupt.
Pity there's not a hidden option on the menu for "command prompt"
On my Type-X, when I prised off the cover the dips were set "on, off, off, on" by default.
Pity there's not a hidden option on the menu for "command prompt"
On my Type-X, when I prised off the cover the dips were set "on, off, off, on" by default.
Use flashrom instead. See attached.
Tonybolony
Professional
did anybody get this running on a TTX+ ? as i just get a blue screen with games
Look one page back in this thread. You need a 9600SE GPU with the correct bios.
Tonybolony
Professional
thanlyou for that , if i do this and flash the card, is the TTX+ able to run SF 3rd Strike and Hyper Street Fighter ?
@Tonybolony here is a games list for the TTX.
The Multi Drive has a subset of those, but not SF... You may be confusing with the X2 as @beast1x5 suggested...
The Multi Drive has a subset of those, but not SF... You may be confusing with the X2 as @beast1x5 suggested...
Tonybolony
Professional
basically what it was, is i was wondering if i could utilise a type x+ i had to go in a cabinet running the multi with SF 3rd Strike or Hyper SF 2 , i have an X2 and X3 , i was trying to give my HL2 TTX + a purpose in life 
kazuo
Champion
You might be able to get it to work with extensive hacking, but it's more effort than required and the TX / X+ are substantially slower than the X2, so I don't think it would run particularly well.
Could try installing MAME.
Could try installing MAME.
