These are command line tools, there is no GUI.
Read here:
https://www.arcade-projects.com/thr...-3-to-use-cf-cards-tutorial.18576/post-289420
Read here:
https://www.arcade-projects.com/thr...-3-to-use-cf-cards-tutorial.18576/post-289420
how to do it is literally in a sticky thread in this very forumI have seen a IDE->SATA adapter in a chihiro at one time, but no details on how it was done.
After this device Lexar my sandisk started working again and work again with this old readernow this cf card not load all games (((. Aw games - load only dolphin.
My Cisco works too@rtw Yeah, Cisco cards give me no trouble at all, can re-write them and they work first try. But the Memory Partner and Kingston ones work occasionally but mostly not. Checked the voltage on the reader and its coming in at 3.304V which should be
Yeah those will not work.Not working
On other photo mini sd workingYeah those will not work.
I use that card without any problem. What kind of adapter are you using ?Its original from amazon and i checked serial number. But fully not responded
I use that card without any problem. What kind of adapter are you using ?