Aha, that would explain a couple of things. Ideal settings on the HAS would be:HAS supergun set to TTL sync output. RGB knob turned to 80%. I"m not getting bright whites like you would on properly adjusted setup. I am curious if anyone else has noticed this. It's almost as if the blacks are slightly crushed. I am just speculating though.
- raw/unprocessed sync, i.e. not processed by the HAS at all, as the scaler does this and double-processing may possibly lead to some quirks
On the A1 side, put this in your ini file:
Code:
rgb=75-ohm
sync=ttl
@RGB - do all the HAS revisions have the option to output sync straight from the Jamma edge, and I presume the RGB is always attenuated and re-amplified to 75-ohm?