Taito X4 is ok for Load X3‘s Emuline's 1TB V4.7 img.

[Daveho]

This is the devlpment mode.

I have the same unit as you have. can u share the bios password so can try on my to change the setting.thx

 

[Daveho]

Bios Password for x4 are all different?

How did you discovered your?

did u find the pw for it. I am still looking.

 

[CPZ - SAVEYOURGAMES]

no I have only asked

 

[Francky]

JVS just doesnt work on the X4 have to use the fast i/o or get a brook

Did you try to use X4 with Brook 4/1 USB with Multi V4 ? all contrrols and joystick works without using Joy2key utility ? Joy2key need to be launch each time when arrrive in the Multi ?

 

[chiil]

Hi after boot screen from the multi I have a black screen... any help please.

 

[juanchomvs]

You can use the fast i/o from your X3 if you have one, just connect to the X4 and off you go , thats how i use mine in one of my cabinets

Hi saw your post. How are you able to connect a fast io to the ttx4? I have a fast io for the ttx3 and I own a ttx4 but unfortunately I am not able to connect it to the fast io since ttx4 does not use the Ethernet port on my io

Please help I was thinking on selling my ttx4 because how frustrating it is to connect.
Any help is appreciate it

 

[Tonybolony]

you have to remove the card and the ethernet and put them in the TTX4 its pretty much Plug n play