hey all. I'm working with the guys over at Brookyln Video Games to build a consolized UMK3 board. I tried this project back in 2011 but the guy disappeared on me after making significant headway.
So far I have an OSSC for video, Minigun supergun, undamned adapters, ordered some extra 4mbit and 8 mbit eproms (additional roms are for hacking/burning involved), im picking up a umk3 board from my friend's arcade, and I need a PSU but I'm stuck there.
I dont know a whole lot about hardware and power, but I have some numbers and suggestions. I was told to keep it small for a console i should get Pico PSU but I have little idea what I should get. The minigun uses what looks like a molex connector, but I'm not sure what would do the trick for everything.
The original power specs I was given for a normal arcade cabinet are
16A Arcade Switching Power Supply - 133 Watt, 110-220V
But i assume this includes powering CRT as well?
Another person said anything that does +5, -5 +12 should be fine. I only sort of know what that means.
Other than that I know I need a case, and Brooklyn games suggested doing am acrylic.
Any help would be appreciated, anything I'm missing, nuances, problematic issues, etc.
Thanks!
So far I have an OSSC for video, Minigun supergun, undamned adapters, ordered some extra 4mbit and 8 mbit eproms (additional roms are for hacking/burning involved), im picking up a umk3 board from my friend's arcade, and I need a PSU but I'm stuck there.
I dont know a whole lot about hardware and power, but I have some numbers and suggestions. I was told to keep it small for a console i should get Pico PSU but I have little idea what I should get. The minigun uses what looks like a molex connector, but I'm not sure what would do the trick for everything.
The original power specs I was given for a normal arcade cabinet are
16A Arcade Switching Power Supply - 133 Watt, 110-220V
But i assume this includes powering CRT as well?
Another person said anything that does +5, -5 +12 should be fine. I only sort of know what that means.
Other than that I know I need a case, and Brooklyn games suggested doing am acrylic.
Any help would be appreciated, anything I'm missing, nuances, problematic issues, etc.
Thanks!