mathewbeall
Champion
Hello All,
I just picked up a CPS3 multikit from Denson (Thanks Denson!) and it all works great running through a RGBS adapter.
I hook up my commodore 1084s monitor (RGB, 15khz) and it obviously doesn't sync.
Do the CPS3 boards only run at 31khz, or is there a jumper somewhere on the board to drop it down to 15khz?
And - correct me if I am wrong, but I hooked up a system246 to the same monitor and saw the same pattern - but system246 has a dip switch I can flip and drop it down to 15khz.
Thanks!
Matt
I just picked up a CPS3 multikit from Denson (Thanks Denson!) and it all works great running through a RGBS adapter.
I hook up my commodore 1084s monitor (RGB, 15khz) and it obviously doesn't sync.
Do the CPS3 boards only run at 31khz, or is there a jumper somewhere on the board to drop it down to 15khz?
And - correct me if I am wrong, but I hooked up a system246 to the same monitor and saw the same pattern - but system246 has a dip switch I can flip and drop it down to 15khz.
Thanks!
Matt