I present to you, my CPS-III with the 13th USA kit of Third Strike in the US.
https://imgur.com/gallery/S7J2URh#hLg815Q
Ahoy hoy Arcade-Projects.com
A bit back, (3 mos) I joined after purchasing a CPS-3 board.
My real goal was to turn it into a game console for fight tournaments, and personal enjoyment.
The endless posts of information has been a WEALTH of information and inspiration.
With that in tow, I was able to complete a really special project to me.
It's not perfect, but it runs really damn well.
Inside is a simple power supply
Undamned USB encoders
Smallcab Supergun
Scart to HDMI upscaler (the one from Amazon for 39 bucks)
Acrylics from Jansen's Customs
Misc parts from Amazon and Frys.
Custom Led lighting lol (blue LED, binder clip from the office, 1-up card, electrical tape, heat shrink, and a molex connector for 12V)
I just wanted to say THANK YOU for all your help, and usefulness during this fun little project.
It's my 2nd foray into Arcade hardware and I'm horrifically hooked now.
I want to make consolizations of arcade gear from my favorite games.
Being I used to mod PCs back in the day, I am finding this pretty satisfying as a hobby.
Now I get it. Thanks a ton everybody!
Lemme know what you think, what can be improved.
https://imgur.com/gallery/S7J2URh#hLg815Q
Ahoy hoy Arcade-Projects.com
A bit back, (3 mos) I joined after purchasing a CPS-3 board.
My real goal was to turn it into a game console for fight tournaments, and personal enjoyment.
The endless posts of information has been a WEALTH of information and inspiration.
With that in tow, I was able to complete a really special project to me.
It's not perfect, but it runs really damn well.
Inside is a simple power supply
Undamned USB encoders
Smallcab Supergun
Scart to HDMI upscaler (the one from Amazon for 39 bucks)
Acrylics from Jansen's Customs
Misc parts from Amazon and Frys.
Custom Led lighting lol (blue LED, binder clip from the office, 1-up card, electrical tape, heat shrink, and a molex connector for 12V)
I just wanted to say THANK YOU for all your help, and usefulness during this fun little project.
It's my 2nd foray into Arcade hardware and I'm horrifically hooked now.
I want to make consolizations of arcade gear from my favorite games.
Being I used to mod PCs back in the day, I am finding this pretty satisfying as a hobby.
Now I get it. Thanks a ton everybody!
Lemme know what you think, what can be improved.