Will be working on some classics that have known issues with power regulation (Pole Position and Centipede). Will also be setting voltages for more modern arcade switching PSU's (Happ, Peter Chou, Sun). So that a PCB isn't made a sacrificial test board to test voltages, will build a harness or two that I will ground across each rail before to test/dial in voltages. Any recommendation for resistors for each rail?
- Wattage/resistance/tolerance for:
- 3.3vdc
- 5vdc
- -5vdc
- 12vdc
- and those odd-ball voltages for some of those classics