J
skate323k137
Enlightened
I made the mistake of touching it on my first f3 mobo. thankfully I didn't torch anything. I had some other folks take readings with multimeters and set mine within the range other people found.
what range are those, and where are you measuring it?
xodaraP
Legendary
I'm with Darksoft on this one, if it ain't broke, don't fix it. If it's working you don't need to know the range or where to measure it, because if it's working, it's correct
skate323k137
Enlightened
In case someone else messes with it on accident, I set mine to 180 ohms. The people I asked measured their own at 160 and 200.
It's a variable resistor, you measure it like any other. Pick a couple points and set your multimeter to ohms.
It's a variable resistor, you measure it like any other. Pick a couple points and set your multimeter to ohms.
waiwainl
Grand Master
If you only received the board - there is not initial 'if it works'
So how to know it is in the right position?
look two posts up. @skate323k137 is telling you the values that you should expect.If you only received the board - there is not initial 'if it works'
waiwainl
Grand Master
ahlook two posts up. @skate323k137 is telling you the values that you should expect.If you only received the board - there is not initial 'if it works'
- thanks
Good point. Actually it maybe there as a final fine tune after production, so it may need precise adjustment on each PCB and the important part is the OUTPUT Voltage.I'm going to measure mine
But would be interesting to know what voltage is controlling and measure it instead of the resistance.
funkycochise
Student
got the same experience from us seller / thief.
eeprom where apart in the parcel and all I get as explanations was insults.
lost 100 € in that ebay bad memory.
and with my several italian experience, all was perfect.
it's all about the honesty of the seller, whatever his nationality.
Just to clear up things. I'm not anti-Italian at all but I got burned so bad that I can't risk the money so I decided just to not deal. Just my choice. The seller I dealt with was very dishonest. Obviously as all have said it's entirely up to the individual seller. Sorry if I offended anyone. I just could never treat anyone like that.
funkycochise
Student
sorry, I my post looked agressive. Just that I read so many times "don't ship to Italy/France/wherever" that I'm bored with that kind of bashing from US fellows. I'm glad to read what you wrote.
hopefully there are still honest people out there
Brentradio
Champion
Well, I'm certainly hoping there are still honest people out there...
We will see when I get me F3 in the mail.
We will see when I get me F3 in the mail.
J
jassin000
What time frame do expect this will go into production (obviously after the MVS/AES Multi has completed)?
beast1x5
Professional
Christmas gifts!!! Les go!!!!